Update workstation installation guide

.vscode/settings.json

@@ -1,6 +1,5 @@
 {
     "files.trimTrailingWhitespace": true,
     "files.insertFinalNewline": true,
-    "files.trimFinalNewlines": true,
     "editor.renderFinalNewline": false
 }

INSTRUCTIONS.md

@@ -1,7 +1,28 @@
-#Tietojärjestelmäasentajien Infra
+# Tietojärjestelmäasentajien Infra
-## PVJJK 1.VOS TJAS - Infra
+## PVJJK 1.VOS Niinisalo
 ### Ylläpitäjän ohjeet
 
+**Työaseman asennus**
+1. Asenna Windows Subsystem for Linux vaihtoehtoisista järjestelmäominaisuuksista.
+2. Käynnistä työasema uudelleen
+3. Asenna Debian käyttöjärjestelmä
+    1. Avaa Powershell järjestelmänvalvojana
+    2. Suorita asennuskomento – `wsl --install -d Debian`
+    3. Aseta käyttäjätunnukseksi `asentaja` ja salasanaksi sama kuin työaseman Windows käyttäjän salasana.
+    4. Vaihda isännän nimi
+        1. Lisää Network kohtaan tai luo Network kohta – `echo "[network]" > /etc/wsl.conf`
+        2. Lisää isännän nimi – `echo "hostname = argo.aito.tjas" > /etc/wsl.conf`
+        3. Lisää Hosts tiedoston generointi – `echo "generateHosts = true" > /etc/wsl.conf`
+    5. Sulje ikkuna
+4. Aseta Debian oletusarvoiseksi käyttöjärjestelmäksi ja käynnistä se uudelleen
+    1. Avaa Powershell järjestelmänvalvojana
+    2. Vaihda oletusarvoinen käyttöjärjestelmä – `wsl --set-default Debian`
+    3. Käynnistä uudelleen käyttöjärjestelmä – `wsl -t Debian`
+    4. Sulje ikkuna
+6. Avaa Debian käynnistävalikosta tai suorita Powershellissä komento järjestelmänvalvojana `wsl -d Debian`
+7. Asenna curl-paketti käyttämällä APT-paketinhallintaa – `sudo apt update && sudo apt install curl`
+8. Lataa ja suorita Init.sh skripti – `bash <(curl https://raw.githubusercontent.com/cwchristerw/tjas-infra/refs/heads/master/init.sh)`
+
 **Palvelimen asennus**
 1. Asenna Debian-käyttöjärjestelmä
 2. Asenna curl-paketti käyttämällä APT-paketinhallintaa – `apt update && apt install curl`
@@ -61,28 +82,36 @@ interface FastEthernet0/1
 interface FastEthernet0/1.10
  description "TINU - INTERNET"
  encapsulation dot1Q 10
- ip address 192.168.1.1 255.255.255.0
+ ip address 192.168.1.1 255.255.255.224
+ ip access-group 10 out
  ip helper-address 192.168.2.10
+ ip nat inside
  no snmp trap link-status
 !
 interface FastEthernet0/1.20
  description "JUVA - INTRA"
  encapsulation dot1Q 20
- ip address 192.168.2.1 255.255.255.0
+ ip address 192.168.2.1 255.255.255.224
+ ip access-group 20 out
  ip helper-address 192.168.2.10
+ ip nat inside
  no snmp trap link-status
 !
 interface FastEthernet0/1.30
  description "AITO - TOIMISTO"
  encapsulation dot1Q 30
- ip address 192.168.3.1 255.255.255.0
+ ip address 192.168.3.1 255.255.255.224
+ ip access-group 30 out
  ip helper-address 192.168.2.10
+ ip nat inside
  no snmp trap link-status
 !
 interface FastEthernet0/1.69
  description "SIVE - HALLINTA"
  encapsulation dot1Q 69
- ip address 192.168.69.1 255.255.255.0
+ ip address 192.168.69.1 255.255.255.192
+ ip access-group 69 in
+ ip access-group 69 out
  ip helper-address 192.168.69.20
  no snmp trap link-status
 !
@@ -94,15 +123,43 @@ interface GigabitEthernet0/0/0
 ip classless
 !
 ip http server
+ip nat inside source list 1 interface FastEthernet0/0 overload
 !
-access-list 1 permit 192.168.0.0
+access-list 1 permit 192.168.1.0 0.0.0.31
-access-list 1 permit 192.168.1.0
+access-list 1 permit 192.168.2.0 0.0.0.31
-access-list 1 permit 192.168.2.0
+access-list 1 permit 192.168.3.0 0.0.0.31
-access-list 1 permit 192.168.3.0
+access-list 10 deny   192.168.0.0 0.0.255.255
-access-list 1 deny   any
+access-list 10 permit any
+access-list 20 permit 192.168.2.0 0.0.0.31
+access-list 20 deny   192.168.0.0 0.0.255.255
+access-list 20 permit any
+access-list 30 permit 192.168.2.10
+access-list 30 permit 192.168.3.0 0.0.0.31
+access-list 30 deny   192.168.0.0 0.0.255.255
+access-list 30 permit any
+access-list 69 permit 192.168.69.0 0.0.0.63
 !
 control-plane
 !
+banner motd ^C
+
+
+
+  .-') _               ('-.      .-')
+ (  OO) )             ( OO ).-. ( OO ).
+ /     '._      ,--.  / . --. /(_)---\_)
+ |'--...__) .-')| ,|  | \-.  \ /    _ |
+ '--.  .--'( OO |(_|.-'-'  |  |\  :` `.
+    |  |   | `-'|  | \| |_.'  | '..`''.)
+    |  |   ,--. |  |  |  .-.  |.-._)   \
+    |  |   |  '-'  /  |  | |  |\       /
+    `--'    `-----'   `--' `--' `-----'
+
+
+ PVJJK 1.VOS NIINISALO
+ r1.net.tjas
+
+^C
 !
 line con 0
 line aux 0
@@ -118,58 +175,164 @@ end
 s1.net.tjas
 ```
 hostname "s1.net.tjas"
+ip default-gateway 192.168.1.1
 snmp-server community "public" Unrestricted
 vlan 1
    name "DEFAULT_VLAN"
-   untagged 1-52
+   untagged 4-52
    ip address dhcp-bootp
+   no untagged 1-3
    exit
 vlan 10
    name "TINU"
-   ip address 192.168.1.2 255.255.255.0
+   ip address 192.168.1.2 255.255.255.224
    tagged 1
    exit
 vlan 20
    name "JUVA"
+   no ip address
    tagged 1-2
    exit
 vlan 30
    name "AITO"
+   no ip address
    tagged 1,3
    exit
 vlan 69
    name "SIVE"
-   ip address 192.168.69.11 255.255.255.0
+   ip address 192.168.69.11 255.255.255.192
-   tagged 1,2,3
+   tagged 1-3
    exit
-ip authorized-managers 192.168.69.20
+ip authorized-managers 192.168.69.20 255.255.255.255
+banner motd "
+
+
+  .-') _               ('-.      .-')
+ (  OO) )             ( OO ).-. ( OO ).
+ /     '._      ,--.  / . --. /(_)---\_)
+ |'--...__) .-')| ,|  | \-.  \ /    _ |
+ '--.  .--'( OO |(_|.-'-'  |  |\  :` `.
+    |  |   | `-'|  | \| |_.'  | '..`''.)
+    |  |   ,--. |  |  |  .-.  |.-._)   \
+    |  |   |  '-'  /  |  | |  |\       /
+    `--'    `-----'   `--' `--' `-----'
+
+
+ PVJJK 1.VOS NIINISALO
+ s1.net.tjas
+
+"
 ip ssh
 password manager
-
 ```
 
 s2.net.tjas
 ```
 hostname "s2.net.tjas"
+interface 3
+   disable
+exit
+interface 4
+   disable
+exit
+interface 5
+   disable
+exit
+interface 6
+   disable
+exit
+interface 7
+   disable
+exit
+interface 8
+   disable
+exit
+interface 9
+   disable
+exit
+interface 10
+   disable
+exit
+interface 11
+   disable
+exit
+interface 12
+   disable
+exit
+interface 13
+   disable
+exit
+interface 14
+   disable
+exit
+interface 15
+   disable
+exit
+interface 16
+   disable
+exit
+interface 17
+   disable
+exit
+interface 18
+   disable
+exit
+interface 19
+   disable
+exit
+interface 20
+   disable
+exit
+interface 21
+   disable
+exit
+interface 22
+   disable
+exit
+interface 23
+   disable
+exit
+interface 24
+   disable
+exit
+ip default-gateway 192.168.2.1
 snmp-server community "public" Unrestricted
 vlan 1
    name "DEFAULT_VLAN"
-   untagged 25-28
+   untagged 3-28
    ip address dhcp-bootp
-   no untagged 1-24
+   no untagged 1-2
    exit
 vlan 20
    name "JUVA"
-   untagged 2-24
+   untagged 3-24
-   ip address 192.168.2.2 255.255.255.0
+   ip address 192.168.2.2 255.255.255.224
-   tagged 1
+   tagged 1-2
    exit
 vlan 69
    name "SIVE"
-   ip address 192.168.69.12 255.255.255.0
+   ip address 192.168.69.12 255.255.255.192
-   tagged 1,2
+   tagged 1-2
    exit
-ip authorized-managers 192.168.69.20 255.255.255.255
+ip authorized-managers 192.168.69.20
+banner motd "
+
+
+  .-') _               ('-.      .-')
+ (  OO) )             ( OO ).-. ( OO ).
+ /     '._      ,--.  / . --. /(_)---\_)
+ |'--...__) .-')| ,|  | \-.  \ /    _ |
+ '--.  .--'( OO |(_|.-'-'  |  |\  :` `.
+    |  |   | `-'|  | \| |_.'  | '..`''.)
+    |  |   ,--. |  |  |  .-.  |.-._)   \
+    |  |   |  '-'  /  |  | |  |\       /
+    `--'    `-----'   `--' `--' `-----'
+
+
+ PVJJK 1.VOS NIINISALO
+ s2.net.tjas
+
+"
 ip ssh
 password manager
 ```
@@ -177,6 +340,40 @@ password manager
 s3.net.tjas
 ```
 hostname "s3.net.tjas"
+interface 2
+   disable
+exit
+interface 3
+   disable
+exit
+interface 4
+   disable
+exit
+interface 5
+   disable
+exit
+interface 6
+   disable
+exit
+interface 7
+   disable
+exit
+interface 8
+   disable
+exit
+interface 9
+   disable
+exit
+interface 10
+   disable
+exit
+interface 11
+   disable
+exit
+interface 12
+   disable
+exit
+ip default-gateway 192.168.3.1
 snmp-server community "public" Unrestricted
 vlan 1
    name "DEFAULT_VLAN"
@@ -186,17 +383,41 @@ vlan 1
    exit
 vlan 30
    name "AITO"
-   untagged 2-24
+   untagged 13-24
-   ip address 192.168.3.2 255.255.255.0
+   ip address 192.168.3.2 255.255.255.224
    tagged 1
    exit
 vlan 69
    name "SIVE"
    untagged 2-24
-   ip address 192.168.69.13 255.255.255.0
+   ip address 192.168.69.13 255.255.255.192
    tagged 1
    exit
-ip authorized-managers 192.168.69.20 255.255.255.255
+ip authorized-managers 192.168.69.20
+banner motd "
+
+
+  .-') _               ('-.      .-')
+ (  OO) )             ( OO ).-. ( OO ).
+ /     '._      ,--.  / . --. /(_)---\_)
+ |'--...__) .-')| ,|  | \-.  \ /    _ |
+ '--.  .--'( OO |(_|.-'-'  |  |\  :` `.
+    |  |   | `-'|  | \| |_.'  | '..`''.)
+    |  |   ,--. |  |  |  .-.  |.-._)   \
+    |  |   |  '-'  /  |  | |  |\       /
+    `--'    `-----'   `--' `--' `-----'
+
+
+ PVJJK 1.VOS NIINISALO
+ s3.net.tjas
+
+"
 ip ssh
 password manager
 ```
+
+# LÄHTEET
+
+## ISSUE - ASCII ART
+ASCII Art Generator
+https://www.textmods.com/ascii-art

README.md

@@ -1,5 +1,5 @@
 # Tietojärjestelmäasentajien Infra
-## PVJJK 1.VOS TJAS - Infra
+## PVJJK 1.VOS NIINISALO
 
 Infran toteutus aloitettiin vuonna 2025 ja sen on suunnitellut [Jääkäri Warén](https://christerwaren.fi).
 

ansible.cfg

@@ -1,5 +1,5 @@
 [defaults]
-inventory = inventories/pvjjk-1vos-tjas
+inventory = inventories/pvjjk-1vos-niinisalo
 hash_behaviour = merge
 gathering = smart
 display_skipped_hosts = false

files/dhcp/dhcpd.conf

@@ -1,125 +0,0 @@
-# dhcpd.conf
-#
-# Sample configuration file for ISC dhcpd
-#
-
-# option definitions common to all supported networks...
-option domain-name "intra.tjas";
-option domain-name-servers 192.168.2.10;
-
-default-lease-time 600;
-max-lease-time 7200;
-
-# The ddns-updates-style parameter controls whether or not the server will
-# attempt to do a DNS update when a lease is confirmed. We default to the
-# behavior of the version 2 packages ('none', since DHCP v2 didn't
-# have support for DDNS.)
-ddns-update-style none;
-
-# If this DHCP server is the official DHCP server for the local
-# network, the authoritative directive should be uncommented.
-authoritative;
-
-# Use this to send dhcp log messages to a different log file (you also
-# have to hack syslog.conf to complete the redirection).
-#log-facility local7;
-
-# No service will be given on this subnet, but declaring it helps the
-# DHCP server to understand the network topology.
-
-#subnet 10.152.187.0 netmask 255.255.255.0 {
-#}
-
-# This is a very basic subnet declaration.
-
-#subnet 10.254.239.0 netmask 255.255.255.224 {
-#  range 10.254.239.10 10.254.239.20;
-#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
-#}
-
-# This declaration allows BOOTP clients to get dynamic addresses,
-# which we don't really recommend.
-
-#subnet 10.254.239.32 netmask 255.255.255.224 {
-#  range dynamic-bootp 10.254.239.40 10.254.239.60;
-#  option broadcast-address 10.254.239.31;
-#  option routers rtr-239-32-1.example.org;
-#}
-
-# A slightly different configuration for an internal subnet.
-#subnet 10.5.5.0 netmask 255.255.255.224 {
-#  range 10.5.5.26 10.5.5.30;
-#  option domain-name-servers ns1.internal.example.org;
-#  option domain-name "internal.example.org";
-#  option routers 10.5.5.1;
-#  option broadcast-address 10.5.5.31;
-#  default-lease-time 600;
-#  max-lease-time 7200;
-#}
-
-# Hosts which require special configuration options can be listed in
-# host statements.   If no address is specified, the address will be
-# allocated dynamically (if possible), but the host-specific information
-# will still come from the host declaration.
-
-#host passacaglia {
-#  hardware ethernet 0:0:c0:5d:bd:95;
-#  filename "vmunix.passacaglia";
-#  server-name "toccata.example.com";
-#}
-
-# Fixed IP addresses can also be specified for hosts.   These addresses
-# should not also be listed as being available for dynamic assignment.
-# Hosts for which fixed IP addresses have been specified can boot using
-# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
-# be booted with DHCP, unless there is an address range on the subnet
-# to which a BOOTP client is connected which has the dynamic-bootp flag
-# set.
-#host fantasia {
-#  hardware ethernet 08:00:07:26:c0:a5;
-#  fixed-address fantasia.example.com;
-#}
-
-# You can declare a class of clients and then do address allocation
-# based on that.   The example below shows a case where all clients
-# in a certain class get addresses on the 10.17.224/24 subnet, and all
-# other clients get addresses on the 10.0.29/24 subnet.
-
-#class "foo" {
-#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
-#}
-
-#shared-network 224-29 {
-#  subnet 10.17.224.0 netmask 255.255.255.0 {
-#    option routers rtr-224.example.org;
-#  }
-#  subnet 10.0.29.0 netmask 255.255.255.0 {
-#    option routers rtr-29.example.org;
-#  }
-#  pool {
-#    allow members of "foo";
-#    range 10.17.224.10 10.17.224.250;
-#  }
-#  pool {
-#    deny members of "foo";
-#    range 10.0.29.10 10.0.29.230;
-#  }
-#}
-
-subnet 192.168.1.0 netmask 255.255.255.0 {
-    range 192.168.1.2 192.168.1.254;
-    option routers 192.168.1.1;
-    option broadcast-address 192.168.1.255;
-}
-
-subnet 192.168.2.0 netmask 255.255.255.0 {
-    range 192.168.2.2 192.168.2.254;
-    option routers 192.168.2.1;
-    option broadcast-address 192.168.2.255;
-}
-
-subnet 192.168.3.0 netmask 255.255.255.0 {
-    range 192.168.3.2 192.168.3.254;
-    option routers 192.168.3.1;
-    option broadcast-address 192.168.3.255;
-}

files/dnsdist/config.conf

@@ -0,0 +1,12 @@
+setLocal('0.0.0.0:53')
+addLocal('[::]:53')
+setACL({'0.0.0.0/0', '::/0'})
+setECSOverride(true)
+setECSSourcePrefixV4(32)
+setECSSourcePrefixV6(128)
+newServer({address='127.0.0.1:531', useClientSubnet=true, pool='authorative'})
+newServer({ address='127.0.0.1:532', useClientSubnet=true, pool='recursor' })
+addAction('tjas', PoolAction('authorative'))
+addAction(AllRule(), PoolAction('recursor'))
+setSecurityPollSuffix("")
+setServFailWhenNoServer(true)

files/issue

@@ -0,0 +1,25 @@
+
+
+
+ .-') _               ('-.      .-')
+(  OO) )             ( OO ).-. ( OO ).
+/     '._      ,--.  / . --. /(_)---\_)
+|'--...__) .-')| ,|  | \-.  \ /    _ |
+'--.  .--'( OO |(_|.-'-'  |  |\  :` `.
+   |  |   | `-'|  | \| |_.'  | '..`''.)
+   |  |   ,--. |  |  |  .-.  |.-._)   \
+   |  |   |  '-'  /  |  | |  |\       /
+   `--'    `-----'   `--' `--' `-----'
+
+
+PVJJK 1.VOS NIINISALO
+TIETOJÄRJESTELMÄASENTAJIEN INTRA
+olympus.juva.tjas
+
+Made by
+Jääkäri Warén
+https://christerwaren.fi
+
+
+
+

files/kea/kea-dhcp4.conf

@@ -0,0 +1,232 @@
+{
+    "Dhcp4": {
+        "interfaces-config": {
+            "interfaces": [ "enp0s25.20" ]
+        },
+        "control-socket": {
+            "socket-type": "unix",
+            "socket-name": "/run/kea/kea4-ctrl-socket"
+        },
+        "lease-database": {
+            "type": "mysql",
+            "name": "{{ config.mariadb.users['kea'].database }}",
+            "user": "{{ config.mariadb.users['kea'].username }}",
+            "password": "{{ config.mariadb.users['kea'].password }}",
+            "host": "127.0.0.1",
+            "port": 3306
+        },
+        "expired-leases-processing": {
+            "reclaim-timer-wait-time": 10,
+            "flush-reclaimed-timer-wait-time": 25,
+            "hold-reclaimed-time": 3600,
+            "max-reclaim-leases": 100,
+            "max-reclaim-time": 250,
+            "unwarned-reclaim-cycles": 5
+        },
+        "renew-timer": 900,
+        "rebind-timer": 1800,
+        "valid-lifetime": 3600,
+        "subnet4": [
+            {
+                "id": 1,
+                "subnet": "192.168.1.0/27",
+                "pools": [
+                    {
+                        "pool": "192.168.1.1 - 192.168.1.30"
+                    }
+                ],
+                "option-data": [
+                    {
+                        "name": "routers",
+                        "data": "192.168.1.1"
+                    },
+                    {
+                        "name": "domain-name-servers",
+                        "data": "1.1.1.1"
+                    },
+                    {
+                        "name": "domain-search",
+                        "data": "puolustusvoimat.fi"
+                    }
+                ],
+                "user-context": {
+                    "name": "Tinu",
+                    "purpose": "Internet"
+                },
+                "reservations": [
+                    {
+                        "hw-address": "00:1d:46:dc:80:09",
+                        "ip-address": "192.168.1.1",
+                        "hostname": "r1.net.tjas"
+                    },
+                    {
+                        "hw-address": "9c:8e:99:9b:c3:80",
+                        "ip-address": "192.168.1.2",
+                        "hostname": "s1.net.tjas"
+                    }
+                ]
+            },
+            {
+                "id": 2,
+                "subnet": "192.168.2.0/27",
+                "interface": "enp0s25.20",
+                "pools": [
+                    {
+                        "pool": "192.168.2.1 - 192.168.2.30"
+                    }
+                ],
+                "option-data": [
+                    {
+                        "name": "routers",
+                        "data": "192.168.2.1"
+                    },
+                    {
+                        "name": "domain-name-servers",
+                        "data": "192.168.2.10, 1.1.1.1"
+                    },
+                    {
+                        "name": "domain-name",
+                        "data": "juva.tjas"
+                    },
+                    {
+                        "name": "domain-search",
+                        "data": "juva.tjas, tjas"
+                    }
+                ],
+                "user-context": {
+                    "name": "Juva",
+                    "purpose": "Intra"
+                },
+                "reservations": [
+                    {
+                        "hw-address": "00:1d:46:dc:80:09",
+                        "ip-address": "192.168.2.1",
+                        "hostname": "r1.net.tjas"
+                    },
+                    {
+                        "hw-address": "00:24:a8:f1:c7:40",
+                        "ip-address": "192.168.2.2",
+                        "hostname": "s2.net.tjas"
+                    },
+                    {
+                        "hw-address": "90:1b:0e:5b:18:fb",
+                        "ip-address": "192.168.2.10",
+                        "hostname": "olympus.juva.tjas"
+                    }
+                ]
+            },
+            {
+                "id": 3,
+                "subnet": "192.168.3.0/27",
+                "pools": [
+                    {
+                        "pool": "192.168.3.1 - 192.168.3.30"
+                    }
+                ],
+                "option-data": [
+                    {
+                        "name": "routers",
+                        "data": "192.168.3.1"
+                    },
+                    {
+                        "name": "domain-name-servers",
+                        "data": "192.168.2.10"
+                    },
+                    {
+                        "name": "domain-name",
+                        "data": "aito.tjas"
+                    },
+                    {
+                        "name": "domain-search",
+                        "data": "aito.tjas, tjas"
+                    }
+                ],
+                "user-context": {
+                    "name": "Aito",
+                    "purpose": "Toimisto"
+                },
+                "reservations": [
+                    {
+                        "hw-address": "00:1d:46:dc:80:09",
+                        "ip-address": "192.168.3.1",
+                        "hostname": "r1.net.tjas"
+                    },
+                    {
+                        "hw-address": "00:1f:fe:ab:9e:c0",
+                        "ip-address": "192.168.3.2",
+                        "hostname": "s3.net.tjas"
+                    }
+                ]
+            },
+            {
+                "id": 69,
+                "subnet": "192.168.69.0/26",
+                "interface": "enp0s25.69",
+                "pools": [
+                    {
+                        "pool": "192.168.69.1 - 192.168.69.62"
+                    }
+                ],
+                "option-data": [
+                    {
+                        "name": "domain-name-servers",
+                        "data": "192.168.69.20"
+                    },
+                    {
+                        "name": "domain-name",
+                        "data": "sive.tjas"
+                    },
+                    {
+                        "name": "domain-search",
+                        "data": "sive.tjas"
+                    }
+                ],
+                "user-context": {
+                    "name": "Sive",
+                    "purpose": "Hallinta"
+                },
+                "reservations": [
+                    {
+                        "hw-address": "00:1d:46:dc:80:09",
+                        "ip-address": "192.168.69.1",
+                        "hostname": "r1.net.tjas"
+                    },
+                    {
+                        "hw-address": "9c:8e:99:9b:c3:80",
+                        "ip-address": "192.168.69.11",
+                        "hostname": "s1.net.tjas"
+                    },
+                    {
+                        "hw-address": "00:24:a8:f1:c7:40",
+                        "ip-address": "192.168.69.12",
+                        "hostname": "s2.net.tjas"
+                    },
+                    {
+                        "hw-address": "00:1f:fe:ab:9e:c0",
+                        "ip-address": "192.168.69.13",
+                        "hostname": "s3.net.tjas"
+                    },
+                    {
+                        "hw-address": "90:1b:0e:5b:18:fc",
+                        "ip-address": "192.168.69.20",
+                        "hostname": "olympus.juva.tjas"
+                    }
+                ]
+            }
+        ],
+
+        "loggers": [
+            {
+                "name": "kea-dhcp4",
+                "output_options": [
+                    {
+                        "output": "stdout",
+                        "pattern": "%-5p %m\n"
+                    }
+                ],
+                "severity": "ERROR",
+                "debuglevel": 0
+            }
+        ]
+    }
+}

files/motd

@@ -0,0 +1,29 @@
+
+
+
+
+  _____                             _       _ _      _
+ |_   _|_ _ _ __   __ _  ___       | |_   _| (_) ___| |_
+   | |/ _` | '_ \ / _` |/ _ \   _  | | | | | | |/ _ \ __|
+   | | (_| | | | | (_| | (_) | | |_| | |_| | | |  __/ |_
+   |_|\__,_|_| |_|\__, |\___/   \___/ \__,_|_|_|\___|\__|
+     _    _       |___/         ____  _
+    / \  | |_ __ | |__   __ _  / ___|(_) ___ _ __ _ __ __ _
+   / _ \ | | '_ \| '_ \ / _` | \___ \| |/ _ \ '__| '__/ _` |
+  / ___ \| | |_) | | | | (_| |  ___) | |  __/ |  | | | (_| |
+ /_/   \_\_| .__/|_| |_|\__,_| |____/|_|\___|_|  |_|  \__,_|
+           |_|
+
+
+PVJJK 1.VOS NIINISALO
+TIETOJÄRJESTELMÄASENTAJIEN INTRA
+olympus.juva.tjas
+
+Palvelimen hallinta on automatisoitu. Manuaaliset muutokset saatetaan
+ylikirjoittaa automatisoidusti.
+
+https://github.com/cwchristerw/tjas-intra
+
+
+
+

files/networking/interfaces

@@ -12,7 +12,12 @@ allow-hotplug enp0s25
 iface enp0s25 inet dhcp
 
 auto enp0s25.20
-iface enp0s25.20 inet dhcp
+iface enp0s25.20 inet static
+  address 192.168.2.10/27
+  gateway 192.168.2.1
+  hwaddress 90:1b:0e:5b:18:fb
 
 auto enp0s25.69
-iface enp0s25.69 inet dhcp
+iface enp0s25.69 inet static
+  address 192.168.69.20/26
+  hwaddress 90:1b:0e:5b:18:fc

files/nginx/conf/000-default.conf

@@ -37,8 +37,8 @@ server {
 
 #     http2 on;
 
-#     ssl_certificate /etc/nginx/certs/pvjjk-1vos-tjas/fullchain.pem;
+#     ssl_certificate /etc/nginx/certs/pvjjk-1vos-niinisalo/fullchain.pem;
-#     ssl_certificate_key /etc/nginx/certs/pvjjk-1vos-tjas/privkey.pem;
+#     ssl_certificate_key /etc/nginx/certs/pvjjk-1vos-niinisalo/privkey.pem;
 #     ssl_protocols TLSv1.2 TLSv1.3;
 #     ssl_ecdh_curve X25519:prime256v1:secp384r1;
 #     ssl_ciphers ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384:DHE-RSA-CHACHA20-POLY1305;
@@ -46,7 +46,7 @@ server {
 #     ssl_session_cache shared:SSL:20m;
 #     ssl_session_timeout 180m;
 
-#     ssl_trusted_certificate /etc/nginx/certs/pvjjk-1vos-tjas/chain.pem;
+#     ssl_trusted_certificate /etc/nginx/certs/pvjjk-1vos-niinisalo/chain.pem;
 
 #     expires off;
 #     etag off;

files/powerdns-authorative/config.conf

@@ -1,6 +1,6 @@
 local-address=0.0.0.0,::
-local-port=53
+local-port=531
-default-soa-content=s1.intra.tjas no-reply.intra.tjas 0 10800 3600 604800 3600
+default-soa-content=olympus.juva.tjas no-reply.intra.tjas 0 10800 3600 604800 3600
 launch=gmysql
 gmysql-host=127.0.0.1
 gmysql-port=3306

files/powerdns-recursor/config.conf

@@ -0,0 +1,9 @@
+incoming:
+  listen:
+    - 127.0.0.1:532
+recursor:
+  forward_zones:
+    - zone: tjas
+      recurse: false
+      forwarders:
+        - 127.0.0.1:531

files/ssh/authorized_keys

@@ -1,2 +1,2 @@
-ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQClWZxHhmgV2LD3mrbLU2VxPXGMx02WaB5MU9t8XJsqAmsIKwUZSqHTrlR20dXPGlZhe5Rx4vf+ZKx0kuNKJMvswEkvpP0la9WSsawWHxhOTrqDr0yZMV1/CncdARw1vse3zJCQVbOflbKYsKgpdJHbMzk5SfSZijSscrgxRTa8qX/ndnmlGrgm4MxezgFBEJrzC4vCTZLK5LPkAva+2A6fwElgR7V1Dkg5p5l0/nvKbBje+ugaiTw7RPy42oC/hHrsvsnTQ4KheD1phRJFCSEnj6l7gxVetVBznZ/K697MrK4aNUFLDV29uiPALj+1fWAYTIO3WPNU/QkH7OEP8JO3 l1.office.tjas
+ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQClWZxHhmgV2LD3mrbLU2VxPXGMx02WaB5MU9t8XJsqAmsIKwUZSqHTrlR20dXPGlZhe5Rx4vf+ZKx0kuNKJMvswEkvpP0la9WSsawWHxhOTrqDr0yZMV1/CncdARw1vse3zJCQVbOflbKYsKgpdJHbMzk5SfSZijSscrgxRTa8qX/ndnmlGrgm4MxezgFBEJrzC4vCTZLK5LPkAva+2A6fwElgR7V1Dkg5p5l0/nvKbBje+ugaiTw7RPy42oC/hHrsvsnTQ4KheD1phRJFCSEnj6l7gxVetVBznZ/K697MrK4aNUFLDV29uiPALj+1fWAYTIO3WPNU/QkH7OEP8JO3 argo.aito.tjas
 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPW5phGhwAG8dmT+sR0uF1gRc0X9xXZiiFxvKUEsPk1N cwchristerw

files/yggdrasil/config.conf

@@ -6,11 +6,17 @@
     # use this section when you may connect via different interfaces.
 
     Peers: [
-        #TRUSTED PEERS - Waren Group
+{% if config.yggdrasil.peers is defined %}
-        #aurora.devices.waren.io
+        #TRUSTED PEERS
-        #201:361f:bbfb:7210:c5b8:3f74:a285:adb9
+{% for peer in config.yggdrasil.peers %}
-        "tls://[2a01:4f9:2a:60c::2]:18836",
+{% if peer.name is defined and peer.address is defined and peer.address is defined %}
-        "tls://95.216.5.243:18836",
+
+        #{{ peer.name }}
+        "{{ peer.address }}"{% if not loop.last %},{% endif %}
+{% endif %}
+{% endfor %}
+{% endif %}
+
     ]
 
     # List of connection strings for static peers in URI format, arranged

init.sh

@@ -4,63 +4,74 @@ if [ ! "$BASH_VERSION" ] ; then
     exit 1
 fi
 
+underline=`tput smul`
+nounderline=`tput rmul`
+bold=$(tput bold)
+normal=$(tput sgr0)
+
 ti-header(){
-    echo $(tput bold)$1$(tput sgr0)
+    echo ${bold}$1${normal}
 }
 
+echo "${bold}"
 echo "
-==============================
+ .-') _               ('-.      .-')
-
+(  OO) )             ( OO ).-. ( OO ).
-PVJJK 1.VOS TJAS - Infra
+/     '._      ,--.  / . --. /(_)---\_)
-Init Script
+|'--...__) .-')| ,|  | \-.  \ /    _ |
-
+'--.  .--'( OO |(_|.-'-'  |  |\  :\` \`.
-------------------------------
+   |  |   | \`-'|  | \| |_.'  | '..\`''.)
+   |  |   ,--. |  |  |  .-.  |.-._)   \\
+   |  |   |  '-'  /  |  | |  |\       /
+   \`--'    \`-----'   \`--' \`--' \`-----'
 "
+echo "
+PVJJK 1.VOS NIINISALO
+TIETOJÄRJESTELMÄASENTAJIEN INTRA
+INIT SCRIPT
+"
+echo -n "${normal}"
 
 stop () {
 
-echo "
-==============================
-"
-
 exit 1
 
 }
 
 ti-header "Haetaan pakettien tiedot..."
-apt update
+sudo apt update
 echo -e "\n\n"
 
 ti-header "Asennetaan PVJJK 1.VOS TJAS Infran riippuvuudet APT-paketinhallinnalla..."
-apt-get install -y python3-pip python3-venv jq git curl lsb-release
+sudo apt-get install -y python3-pip python3-venv jq git curl lsb-release
 echo -e "\n\n"
 
-mkdir -p ~/.ssh/keys/pvjjk-1vos-tjas &> /dev/null
+mkdir -p $HOME/.ssh/keys/pvjjk-1vos-niinisalo &> /dev/null
-if [[ ! -f ~/.ssh/keys/pvjjk-1vos-tjas/infra ]]
+if [[ ! -f $HOME/.ssh/keys/pvjjk-1vos-niinisalo/infra ]]
 then
     ti-header "Generoidaan SSH-avain Infra-repon käyttöön..."
-    ssh-keygen -f ~/.ssh/keys/pvjjk-1vos-tjas/infra -t ed25519 -N '' -C $(hostname --fqdn)
+    ssh-keygen -f $HOME/.ssh/keys/pvjjk-1vos-niinisalo/infra -t ed25519 -N '' -C $(hostname --fqdn)
     echo -e "\n\n"
 fi
 
 ti-header "Luodaan Ansiblelle virtuaalinen ympäristö..."
-python3 -m venv ~/.venv/ansible
+python3 -m venv $HOME/.venv/ansible
 echo -e "\n\n"
 
 ti-header "Asennetaan Ansiblen riippuvuudet..."
-~/.venv/ansible/bin/pip3 install cryptography dnspython hvac jmespath netaddr pexpect
+$HOME/.venv/ansible/bin/pip3 install cryptography dnspython hvac jmespath netaddr pexpect
 echo -e "\n\n"
 
 ti-header "Asennetaan Ansible..."
-~/.venv/ansible/bin/pip3 install ansible
+$HOME/.venv/ansible/bin/pip3 install ansible
 echo -e "\n\n"
 
 ti-header "Asennetaan Ansible kokoelmat..."
-~/.venv/ansible/bin/ansible-galaxy collection install ansible.posix containers.podman --upgrade
+$HOME/.venv/ansible/bin/ansible-galaxy collection install ansible.posix containers.podman --upgrade
 echo -e "\n\n"
 
 ti-header "Lisää SSH-avain Infra-repon käyttöön..."
-cat ~/.ssh/keys/pvjjk-1vos-tjas/infra.pub
+cat $HOME/.ssh/keys/pvjjk-1vos-niinisalo/infra.pub
 
 echo -n "Onko avain lisätty Github-repoon? [K/E]"
 while [[ -z $SSHKEY_QUESTION || ! -z $SSHKEY_QUESTION && $SSHKEY_QUESTION != "K" ]]
@@ -69,8 +80,8 @@ do
 done
 echo -e "\n\n"
 
-mkdir -p ~/.ansible/vault &> /dev/null
+mkdir -p $HOME/.ansible/vault &> /dev/null
-if [[ ! -f ~/.ansible/vault/pvjjk-1vos-tjas ]]
+if [[ ! -f $HOME/.ansible/vault/pvjjk-1vos-niinisalo ]]
 then
     ti-header "Syötä Ansible Vaultin salasana..."
     echo -n "Salasana: "
@@ -80,14 +91,14 @@ then
 
         if [[ ! -z $VAULT_PASSWORD ]]
         then
-            echo "$VAULT_PASSWORD" > ~/.ansible/vault/pvjjk-1vos-tjas
+            echo "$VAULT_PASSWORD" > $HOME/.ansible/vault/pvjjk-1vos-niinisalo
         fi
     done
     echo -e "\n\n"
 fi
 
 ti-header "Suoritetaan Infran asennus..."
-~/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d ~/.ansible/pull/pvjjk-1vos-tjas/infra --accept-host-key --private-key ~/.ssh/keys/pvjjk-1vos-tjas/infra --vault-password-file ~/.ansible/vault/pvjjk-1vos-tjas tasks.yml -t installer
+$HOME/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d $HOME/.ansible/pull/pvjjk-1vos-niinisalo/infra --accept-host-key --private-key $HOME/.ssh/keys/pvjjk-1vos-niinisalo/infra --vault-password-file $HOME/.ansible/vault/pvjjk-1vos-niinisalo tasks.yml -t installer
 echo -e "\n\n"
 
 echo "

inventories/pvjjk-1vos-niinisalo/group_vars/pvjjk_1vos_niinisalo

@@ -0,0 +1,6 @@
+$ANSIBLE_VAULT;1.2;AES256;pvjjk-1vos-niinisalo
+30383633646132396336336135366264386137643166376336666261316465346632353333616361
+3134623361333633653666313035633536396662613234320a386239373636623061383331663438
+64366431613763376239613036633365346266643163396331653237313662346231623731373530
+6630653939373762380a363939383862623336666361303032653431356139383766663331656335
+3438

inventories/pvjjk-1vos-niinisalo/host_vars/argo.aito.tjas

@@ -0,0 +1,6 @@
+$ANSIBLE_VAULT;1.2;AES256;pvjjk-1vos-niinisalo
+37353031396164353032396635313539613734613432323435383137303835383439663439363337
+6230323066313361383061633932616230363465326239640a333739323064653263336337633639
+64343833623362323734363239653866383037313331613738653133636364623237326637313232
+3462636261386230380a313634313965343733616137663532623965393835306562633635633831
+3166

inventories/pvjjk-1vos-niinisalo/host_vars/olympus.juva.tjas

@@ -0,0 +1,51 @@
+$ANSIBLE_VAULT;1.2;AES256;pvjjk-1vos-niinisalo
+30386163316331336461633036653363613064366361653938616138353736366463643664393933
+6533383232616130626431353164663738346630616465300a393062663634356566656562646137
+36623535313932316262663064366535616565386436653761336463323163646439656563303262
+6531373030393264310a623933386234306532643664363335386231626664643531656433323731
+30373237626531336431343965313239616339356162383262313363363262613463303236643734
+62303636646232383235316137393634626235386662616339343231626661376331396138343361
+31663630306431653532666463326536636365663163663162643136366363333638333930373234
+36306166366533636562363063336436333465393231316363343864373335646437373561353538
+31613162643664633435363831326230373635313165633566323135303263323034636265393163
+62373234613334393261356464643262616132343963383165303534346335373634396161383532
+31623330373935613866336135323038343030353865373863633562303134613662353762376134
+61653035313965316134666534366435663333386235636266376164663731646365626135613166
+39333934653563623966366466613436313635313537363337386133356433356336303938333366
+66653735636462383666396332656333666234333435333062356338383034656637323438316134
+62386136663962336232623663666438333931376561303964636563306664313134373338303339
+32313635643136396365383834343438633463366262366330653034333332653038356331346566
+30336164393136383434646636376239656162643734643735306436303961326565346566333461
+33383861356537656262646131386134303165636632343134383264353466316633663732396334
+33373664633239396234366534636365346631643063373836666233626565626234363433313866
+31663464346264393731623364373035616134376430333764383836353132386339636537326637
+36366662333336373633653330353939396239623037653862393932373932353834373339373934
+61663338666164663235653337336238626462653336313532643131383638336535376232303465
+64363530393065383639663731383036613338343436313937663162643434323835353363653738
+62613139343934656135313832323532623263653038353166313531643036303538613436323664
+33356434623633643462326564383263323833376165366536633264656366353137316265653534
+36656561353634626330636363636133356265306336623737643961663061343630383330386538
+63636434303066646261636338323563373663323835386563393539616663636139356536393462
+37363766356138616232333162666562333261626661646538613862306264336636396562313665
+35373266366134623263663363376630343263623335666663396438663238636534393130623134
+36653465383763646563386361636530393366323538336532393661306362346333353661303334
+32633966303964383861653365626332316135373731393935313262383164346233353765396561
+33323864306336353732623937386235646366663764653965633764643864366331666262386639
+66326335326562646630346435663533313335373034663565333839323961383366643263356133
+64303030366263356231343530343566623935306431653866613165393633643835653330666436
+38663535373666333763386436646337656133303262396237663931323864336630646466306462
+65656536336533343065316637613034626333343837616363376263636635363866383638393234
+39373030663230383865396131363638376537363362666439636235626461303930396464313532
+63306136613265636438333764646465306565333435666233656534656538646465636263363433
+37356131353530363665336564386264616235613564363065356234336537363561313666653637
+35336638623730633735643465316164323739316636353762653965633831626561313532626139
+62303933376637376334666362306133383035376561333361326338663762363230303533363632
+62383539626263363636636164366139306666333165636130323765643532363338656261396135
+36336664656335383561643637383066653531303236323765356666343765616134343036313538
+34623935616531323536383565313238333564613635343332303238626534613337353430303864
+30383131346163636335363563656465316263316439646530663665386636393261386536306265
+34656230643662653665383730396335646562306161663233353835666131633730663237336434
+62643631653738633638366133396364623837343138613765616362633262333333646639396637
+36386533386439623866346335376164336439366133643266663938643333383836346538636536
+35376335306435616236323163616163656366366630656535393233643966313166346530383365
+3630646439643335393964313862363134396566636661643666

inventories/pvjjk-1vos-niinisalo/hosts.yml

@@ -1,6 +1,7 @@
 ---
-pvjjk_1vos_tjas:
+pvjjk_1vos_niinisalo:
   hosts:
-    olympus.intra.tjas:
+    argo.aito.tjas:
+    olympus.juva.tjas:
   vars:
     ansible_python_interpreter: /usr/bin/python3

inventories/pvjjk-1vos-tjas/host_vars/olympus.intra.tjas

@@ -1,34 +0,0 @@
-$ANSIBLE_VAULT;1.2;AES256;pvjjk-1vos-tjas
-33376562363863333566646437313135363332623231643964346461613335623062303161643566
-3038343664303937646664393536356463633966613633320a626663353131613163316234316433
-31323230383964383634636338333836613264613064316664616537313934303830303166386633
-6363653364646434360a633235636339336531666234666134666166653539623634343363643161
-33656438306262356132346163626566656166653333643465366136653465373535353838383439
-64626663376536633834336564663665353632393537326366313130633330646562666238353936
-30363230323330316534343165373433663036393866626438613035636339616164303761333135
-65316437663663663764663463333833663937346636383364303366393264393061383164353533
-33323230383464313565316134346334343565643331653333316437396461633133323662626635
-61633362303261643039313566616537316333346562366165373961383734663934653236663934
-39653261663730373136363130626332303836636362613661306164643361363062353864393465
-66383833653261383562313939656465623736656132383530313739313264356335616631613864
-30373338346563346361383462336338303235306139346530363665376335363230386232323734
-61316463656135356431313236613132323937303533356433376633626462303632616462663730
-30313163306233616164306136643032393839353230373439653363323863383266363432356438
-35366361623731353934646230333165636635346166366530633863343936393138306534343563
-65396136656438613931313965396638353333313962663133663632613430396331656230356264
-66343731396534633761323863303936323937306334366539346264373936663231613961313637
-65306161356539366234613131386565343666653133363635336335316263663431373837636636
-63633232623733343932363862366233326666626164313330353830383563316533636539636263
-35386339393663623739623663396333643662343031363530343738663833663166313632376433
-63303861633063333365306137373739633030393133333733636266306237383034653635396664
-32373831636435613235623862613037663838333731386336656665646634373339626637653661
-30343435323934626538353631383533363163633662326263646364383437383961656136626664
-61306662646435343538333737386535623763376566373833393133353030346563326136383435
-66363838343539383462313933366531333339333032363530636235633461316162643065313333
-36633338326530653336353030363536363932663038373337653766373630313237343536323762
-66633137383631333333386532303864633930663031653639373438643564613338646463623963
-31323366373330346430393435393638363032613864633334303138363765363162613638346234
-31633831313535373862646132616562623532303266623666333164613638646339643838333839
-31623533393830353234303664313662373737373139323035366430646266393939626333376136
-33346432356339323732393864363838656430633035303864636436393066393531333030636337
-61333432666539333534383663313964636433306161353465346366333766623138

protect.sh

@@ -5,23 +5,37 @@ nounderline=`tput rmul`
 bold=$(tput bold)
 normal=$(tput sgr0)
 
-echo "${bold}PVJJK 1.VOS TJAS / Infra / Protect${normal}"
+echo "${bold}"
+echo "
+ .-') _               ('-.      .-')
+(  OO) )             ( OO ).-. ( OO ).
+/     '._      ,--.  / . --. /(_)---\_)
+|'--...__) .-')| ,|  | \-.  \ /    _ |
+'--.  .--'( OO |(_|.-'-'  |  |\  :\` \`.
+   |  |   | \`-'|  | \| |_.'  | '..\`''.)
+   |  |   ,--. |  |  |  .-.  |.-._)   \\
+   |  |   |  '-'  /  |  | |  |\       /
+   \`--'    \`-----'   \`--' \`--' \`-----'
+"
+echo "
+PVJJK 1.VOS NIINISALO
+TIETOJÄRJESTELMÄASENTAJIEN INTRA
+PROTECT SCRIPT
+"
+echo -n "${normal}"
 action=$1
 
 encrypt() {
-    echo "${underline}Encrypting...${nounderline}"
+    execute "ansible-vault encrypt --vault-id $1@vault/$1" $1
-    execute "ansible-vault encrypt --vault-id pvjjk-1vos-tjas@vault/pvjjk-1vos-tjas"
 }
 
 decrypt() {
-    echo "${underline}Decrypting...${nounderline}"
+    execute "ansible-vault decrypt --vault-id $1@vault/$1" $1
-    execute "ansible-vault decrypt --vault-id pvjjk-1vos-tjas@vault/pvjjk-1vos-tjas"
 }
 
 list() {
-    echo "${underline}Listing...${nounderline}"
     i=0
-    for file in inventories/*/group_vars/* inventories/*/host_vars/*;
+    for file in inventories/$1/group_vars/* inventories/$1/host_vars/*;
     do
         i=$((i + 1))
         echo $i")"$file
@@ -29,7 +43,8 @@ list() {
 }
 
 execute() {
-for file in inventories/*/group_vars/* inventories/*/host_vars/*;
+i=0
+for file in inventories/$2/group_vars/* inventories/$2/host_vars/*;
     do
         i=$((i + 1))
         echo $i")"$file
@@ -40,18 +55,23 @@ for file in inventories/*/group_vars/* inventories/*/host_vars/*;
 
 case $action in
     encrypt)
-        encrypt
+        echo "${underline}Encrypting...${nounderline}"
+        encrypt pvjjk-1vos-niinisalo
         ;;
     decrypt)
-        decrypt
+        echo "${underline}Decrypting...${nounderline}"
+        decrypt pvjjk-1vos-niinisalo
         ;;
     list)
-        list
+        echo "${underline}Listing...${nounderline}"
-        ;;
+        list pvjjk-1vos-niinisalo
-    help)
-        echo "encrypt, decrypt, list"
         ;;
     *)
-        echo "..."
+        echo "${underline}HELP${nounderline}"
+        echo "encrypt - Encrypt Files"
+        echo "decrypt - Decrypt Files"
+        echo "list - List Files"
         ;;
 esac
+
+echo -e "\n\n\n"

tasks.yml

@@ -10,6 +10,8 @@
       import_tasks: tasks/installer.yml
       vars:
         ansible_python_interpreter: "{{ ansible_facts.user_dir }}/.venv/ansible/bin/python3"
+      when:
+        - inventory_hostname == "olympus.juva.tjas"
       tags:
         - installer
         - never
@@ -18,6 +20,8 @@
       import_tasks: tasks/maintenance.yml
       vars:
         ansible_python_interpreter: "{{ ansible_facts.user_dir }}/.venv/ansible/bin/python3"
+      when:
+        - inventory_hostname == "olympus.juva.tjas"
       tags:
         - maintenance
         - never
@@ -26,6 +30,8 @@
       import_tasks: tasks/deployer.yml
       vars:
         ansible_python_interpreter: "{{ ansible_facts.user_dir }}/.venv/ansible/bin/python3"
+      when:
+        - inventory_hostname == "olympus.juva.tjas"
       tags:
         - deployer
         - never

tasks/deployer.yml

@@ -2,7 +2,7 @@
 - name: "Deployer - SSH - Add Authorized Keys"
   ansible.builtin.template:
     src: './files/ssh/authorized_keys'
-    dest: '~/.ssh/authorized_keys'
+    dest: '/root/.ssh/authorized_keys'
   tags:
     - ssh
 
@@ -24,14 +24,14 @@
 
 - name: "Deployer - Yggdrasil - Configure - Create Folder"
   ansible.builtin.file:
-    path: "~/data/yggdrasil/"
+    path: "/root/data/yggdrasil/"
     state: directory
   tags:
     - yggdrasil
 
 - name: "Deployer - Yggdrasil - Configure - Create Subfolders"
   ansible.builtin.file:
-    dest: '~/data/yggdrasil/{{ item.path }}'
+    dest: '/root/data/yggdrasil/{{ item.path }}'
     state: directory
   with_filetree: './files/yggdrasil/'
   loop_control:
@@ -44,7 +44,7 @@
 - name: "Deployer - Yggdrasil - Configure - Generating & Transferring Files"
   ansible.builtin.template:
     src: '{{ item.src }}'
-    dest: '~/data/yggdrasil/{{ item.path }}'
+    dest: '/root/data/yggdrasil/{{ item.path }}'
   register: deployerTaskY1
   with_filetree: './files/yggdrasil/'
   loop_control:
@@ -58,7 +58,6 @@
   containers.podman.podman_image:
     name: docker.io/library/golang
     tag: alpine
-    force: true
   register: deployerTaskY2
 
 - name: "Deployer - Yggdrasil - Clone Repository"
@@ -67,11 +66,11 @@
     dest: ".cache/git/yggdrasil"
   register: deployerTaskY3
 
-- name: "Deployer - Yggdrasil - Pull Image"
+- name: "Deployer - Yggdrasil - Build Image"
   containers.podman.podman_image:
-    name: pvjjk-1vos-tjas/nginx
+    name: pvjjk-1vos-niinisalo/yggdrasil
     tag: latest
-    path: "~/data/yggdrasil"
+    path: "/root/data/yggdrasil"
     build:
       format: docker
     force: true
@@ -80,7 +79,7 @@
 - name: "Deployer - Yggdrasil - Run Container"
   containers.podman.podman_container:
     name: yggdrasil
-    image: pvjjk-1vos-tjas/nginx:latest
+    image: pvjjk-1vos-niinisalo/yggdrasil:latest
     state: started
     recreate: on
     network: host
@@ -96,40 +95,18 @@
   tags:
     - yggdrasil
 
-# - name: "Deployer - DHCP - Install"
-#   ansible.builtin.apt:
-#     name:
-#       - isc-dhcp-server
-#     state: latest
-
-# - name: "Deployer - DHCP - Config"
-#   ansible.builtin.template:
-#     src: './files/dhcp/dhcpd.conf'
-#     dest: '/etc/dhcp/dhcpd.conf'
-#   register: deployerTaskD1
-#   tags:
-#     - dhcp
-
-# - name: "Deployer : DHCP : Restart"
-#   ansible.builtin.systemd_service:
-#     name: isc-dhcp-server
-#     state: restarted
-#     enabled: true
-#   when:
-#     - (deployerTaskD1 is defined and deployerTaskD1.changed) or deployerTaskD1 is undefined
-
 - name: "Deployer - MariaDB - Create Folder"
   ansible.builtin.file:
-    path: ~/data/mariadb
+    path: /root/data/mariadb
     state: directory
   tags:
     - mariadb
+    - database
 
 - name: "Deployer - MariaDB - Pull Image"
   containers.podman.podman_image:
     name: docker.io/library/mariadb
     tag: latest
-    force: true
   register: deployerTaskM1
 
 - name: "Deployer - MariaDB - Run Container"
@@ -140,7 +117,7 @@
     restart: on
     network: host
     volumes:
-      - "~/data/mariadb:/var/lib/mysql"
+      - "/root/data/mariadb:/var/lib/mysql"
     restart_policy: always
     env:
       MYSQL_ROOT_PASSWORD: "{{ config.mariadb.users.root.password }}"
@@ -149,6 +126,7 @@
     - (deployerTaskM1 is defined and deployerTaskM1.changed) or deployerTaskM1 is undefined
   tags:
     - mariadb
+    - database
 
 - name: "Deployer - MariaDB - Wait"
   ansible.builtin.wait_for:
@@ -159,6 +137,7 @@
     - (deployerTaskM2 is defined and deployerTaskM2.changed) or deployerTaskM2 is undefined
   tags:
     - mariadb
+    - database
 
 - name: "Deployer - MariaDB - Upgrade"
   containers.podman.podman_container_exec:
@@ -171,6 +150,7 @@
     - (deployerTaskM2 is defined and deployerTaskM2.changed) or deployerTaskM2 is undefined
   tags:
     - mariadb
+    - database
 
 - name: "Deployer - MariaDB - Create Users"
   community.mysql.mysql_user:
@@ -187,8 +167,14 @@
     loop_var: "user"
   when:
     - (deployerTaskM2 is defined and deployerTaskM2.changed) or deployerTaskM2 is undefined
+    - config.mariadb.users is defined
+    - config.mariadb.users[user] is defined
+    - config.mariadb.users[user].username is defined
+    - config.mariadb.users[user].password is defined
+    - config.mariadb.users[user].database is defined
   tags:
     - mariadb
+    - database
 
 - name: "Deployer - MariaDB - Create Database"
   community.mysql.mysql_db:
@@ -202,73 +188,260 @@
     loop_var: "user"
   when:
     - (deployerTaskM2 is defined and deployerTaskM2.changed) or deployerTaskM2 is undefined
+    - config.mariadb.users is defined
+    - config.mariadb.users[user] is defined
+    - config.mariadb.users[user].username is defined
+    - config.mariadb.users[user].password is defined
+    - config.mariadb.users[user].database is defined
   tags:
     - mariadb
+    - database
 
-- name: "Deployer - PowerDNS - Configure - Create Folder"
+- name: "Deployer - Kea - Install"
+  ansible.builtin.apt:
+    name:
+      - kea
+    state: latest
+
+- name: "Deployer - Kea - Configure - DHCP4"
+  ansible.builtin.template:
+    src: './files/kea/kea-dhcp4.conf'
+    dest: '/etc/kea/kea-dhcp4.conf'
+  register: deployerTaskK1
+  tags:
+    - kea
+    - dhcp
+
+- name: "Deployer - Kea - Configure - Database : Init"
+  ansible.builtin.command:
+    cmd: "/usr/sbin/kea-admin db-init mysql -h 127.0.0.1 -n {{ config.mariadb.users['kea'].database }} -u {{ config.mariadb.users['kea'].username }} -p {{ config.mariadb.users['kea'].password }}"
+  register: deployerTaskK2
+  changed_when:
+    - deployerTaskK2.stdout.find('Initializing database') != -1
+  failed_when:
+    - deployerTaskK2.stdout.find('ERROR') != -1
+    - deployerTaskK2.stdout.find('Expected empty database kea.') == -1
+  tags:
+    - kea
+    - dhcp
+
+- name: "Deployer - Kea - Configure - Database : Upgrade"
+  ansible.builtin.command:
+    cmd: "/usr/sbin/kea-admin db-upgrade mysql -h 127.0.0.1 -n {{ config.mariadb.users['kea'].database }} -u {{ config.mariadb.users['kea'].username }} -p {{ config.mariadb.users['kea'].password }}"
+  tags:
+    - kea
+    - dhcp
+
+- name: "Deployer : Kea : Restart"
+  ansible.builtin.systemd_service:
+    name: kea-dhcp4-server
+    state: restarted
+  when:
+    - (deployerTaskK1 is defined and deployerTaskK1.changed) or deployerTaskK1 is undefined or (deployerTaskK2 is defined and deployerTaskK2.changed) or deployerTaskK2 is undefined
+  tags:
+    - kea
+    - dhcp
+
+- name: "Deployer : Kea : Start"
+  ansible.builtin.systemd_service:
+    name: kea-dhcp4-server
+    state: started
+  tags:
+    - kea
+    - dhcp
+
+
+- name: "Deployer - dnsdist - Configure - Create Folder"
   ansible.builtin.file:
-    path: "~/data/powerdns/"
+    path: "/root/data/dnsdist/"
     state: directory
   tags:
-    - powerdns
+    - dnsdist
+    - dns
 
-- name: "Deployer - PowerDNS - Configure - Create Subfolders"
+- name: "Deployer - dnsdist - Configure - Create Subfolders"
   ansible.builtin.file:
-    dest: '~/data/powerdns/{{ item.path }}'
+    dest: '/root/data/dnsdist/{{ item.path }}'
     state: directory
-  with_filetree: './files/powerdns/'
+  with_filetree: './files/dnsdist/'
   loop_control:
     label: "{{ item.path }}"
   when:
     - item.state == 'directory'
   tags:
-    - powerdns
+    - dnsdist
+    - dns
 
-- name: "Deployer - PowerDNS - Configure - Generating & Transferring Files"
+- name: "Deployer - dnsdist - Configure - Generating & Transferring Files"
   ansible.builtin.template:
     src: '{{ item.src }}'
-    dest: '~/data/powerdns/{{ item.path }}'
+    dest: '/root/data/dnsdist/{{ item.path }}'
-  register: deployerTaskP1
+  register: deployerTaskD1
-  with_filetree: './files/powerdns/'
+  with_filetree: './files/dnsdist/'
   loop_control:
     label: "{{ item.path }}"
   when:
     - item.state == 'file'
   tags:
-    - powerdns
+    - dnsdist
+    - dns
 
-- name: "Deployer - PowerDNS - Pull Image"
+- name: "Deployer - dnsdist - Pull Image"
   containers.podman.podman_image:
-    name: docker.io/powerdns/pdns-auth-49
+    name: docker.io/powerdns/dnsdist-20
     tag: latest
-    force: true
+  register: deployerTaskD2
-  register: deployerTaskP2
 
-- name: "Deployer - PowerDNS - Run Container"
+- name: "Deployer - dnsdist - Run Container"
   containers.podman.podman_container:
-    name: powerdns
+    name: dnsdist
-    image: docker.io/powerdns/pdns-auth-49:latest
+    image: docker.io/powerdns/dnsdist-20:latest
     state: started
     recreate: on
     network: host
     restart_policy: always
     volumes:
-      - "~/data/powerdns/config.conf:/etc/powerdns/pdns.conf:ro"
+      - "/root/data/dnsdist/config.conf:/etc/dnsdist/dnsdist.conf:ro"
+    tty: yes
+    interactive: yes
+    capabilities:
+      - NET_BIND_SERVICE
   when:
-    - (deployerTaskP1 is defined and deployerTaskP1.changed) or deployerTaskP1 is undefined or (deployerTaskP2 is defined and deployerTaskP2.changed) or deployerTaskP2 is undefined
+    - (deployerTaskD1 is defined and deployerTaskD1.changed) or deployerTaskD1 is undefined or (deployerTaskD2 is defined and deployerTaskD2.changed) or deployerTaskD2 is undefined
   tags:
-    - powerdns
+    - dnsdist
+    - dns
+
+- name: "Deployer - PowerDNS Authorative - Configure - Create Folder"
+  ansible.builtin.file:
+    path: "/root/data/powerdns-authorative/"
+    state: directory
+  tags:
+    - powerdns-authorative
+    - dns
+
+- name: "Deployer - PowerDNS Authorative - Configure - Create Subfolders"
+  ansible.builtin.file:
+    dest: '/root/data/powerdns-authorative/{{ item.path }}'
+    state: directory
+  with_filetree: './files/powerdns-authorative/'
+  loop_control:
+    label: "{{ item.path }}"
+  when:
+    - item.state == 'directory'
+  tags:
+    - powerdns-authorative
+    - dns
+
+- name: "Deployer - PowerDNS Authorative - Configure - Generating & Transferring Files"
+  ansible.builtin.template:
+    src: '{{ item.src }}'
+    dest: '/root/data/powerdns-authorative/{{ item.path }}'
+  register: deployerTaskPA1
+  with_filetree: './files/powerdns-authorative/'
+  loop_control:
+    label: "{{ item.path }}"
+  when:
+    - item.state == 'file'
+  tags:
+    - powerdns-authorative
+    - dns
+
+- name: "Deployer - PowerDNS Authorative - Pull Image"
+  containers.podman.podman_image:
+    name: docker.io/powerdns/pdns-auth-50
+    tag: latest
+  register: deployerTaskPA2
+
+- name: "Deployer - PowerDNS Authorative - Run Container"
+  containers.podman.podman_container:
+    name: powerdns-authorative
+    image: docker.io/powerdns/pdns-auth-50:latest
+    state: started
+    recreate: on
+    network: host
+    restart_policy: always
+    volumes:
+      - "/root/data/powerdns-authorative/config.conf:/etc/powerdns/pdns.conf:ro"
+    capabilities:
+      - NET_BIND_SERVICE
+  when:
+    - (deployerTaskPA1 is defined and deployerTaskPA1.changed) or deployerTaskPA1 is undefined or (deployerTaskPA2 is defined and deployerTaskPA2.changed) or deployerTaskPA2 is undefined
+  tags:
+    - powerdns-authorative
+    - dns
+
+
+- name: "Deployer - PowerDNS Recursor - Configure - Create Folder"
+  ansible.builtin.file:
+    path: "/root/data/powerdns-recursor/"
+    state: directory
+  tags:
+    - powerdns-recursor
+    - dns
+
+- name: "Deployer - PowerDNS Recursor - Configure - Create Subfolders"
+  ansible.builtin.file:
+    dest: '/root/data/powerdns-recursor/{{ item.path }}'
+    state: directory
+  with_filetree: './files/powerdns-recursor/'
+  loop_control:
+    label: "{{ item.path }}"
+  when:
+    - item.state == 'directory'
+  tags:
+    - powerdns-recursor
+    - dns
+
+- name: "Deployer - PowerDNS Recursor - Configure - Generating & Transferring Files"
+  ansible.builtin.template:
+    src: '{{ item.src }}'
+    dest: '/root/data/powerdns-recursor/{{ item.path }}'
+  register: deployerTaskPR1
+  with_filetree: './files/powerdns-recursor/'
+  loop_control:
+    label: "{{ item.path }}"
+  when:
+    - item.state == 'file'
+  tags:
+    - powerdns-recursor
+    - dns
+
+- name: "Deployer - PowerDNS Recursor - Pull Image"
+  containers.podman.podman_image:
+    name: docker.io/powerdns/pdns-recursor-52
+    tag: latest
+  register: deployerTaskPR2
+
+- name: "Deployer - PowerDNS Recursor - Run Container"
+  containers.podman.podman_container:
+    name: powerdns-recursor
+    image: docker.io/powerdns/pdns-recursor-52:latest
+    state: started
+    recreate: on
+    network: host
+    restart_policy: always
+    volumes:
+      - "/root/data/powerdns-recursor/config.conf:/etc/powerdns/recursor.conf:ro"
+    capabilities:
+      - NET_BIND_SERVICE
+  when:
+    - (deployerTaskPR1 is defined and deployerTaskPR1.changed) or deployerTaskPR1 is undefined or (deployerTaskPR2 is defined and deployerTaskPR2.changed) or deployerTaskPR2 is undefined
+  tags:
+    - powerdns-recursor
+    - dns
 
 - name: "Deployer - Nginx - Configure - Create Folder"
   ansible.builtin.file:
-    path: "~/data/nginx/"
+    path: "/root/data/nginx/"
     state: directory
   tags:
     - nginx
+    - www
 
 - name: "Deployer - Nginx - Configure - Create Subfolders"
   ansible.builtin.file:
-    dest: '~/data/nginx/{{ item.path }}'
+    dest: '/root/data/nginx/{{ item.path }}'
     state: directory
   with_filetree: './files/nginx/'
   loop_control:
@@ -277,11 +450,12 @@
     - item.state == 'directory'
   tags:
     - nginx
+    - www
 
 - name: "Deployer - Nginx - Configure - Generating & Transferring Files"
   ansible.builtin.template:
     src: '{{ item.src }}'
-    dest: '~/data/nginx/{{ item.path }}'
+    dest: '/root/data/nginx/{{ item.path }}'
   register: deployerTaskN1
   with_filetree: './files/nginx/'
   loop_control:
@@ -290,12 +464,12 @@
     - item.state == 'file'
   tags:
     - nginx
+    - www
 
 - name: "Deployer - Nginx - Pull Image"
   containers.podman.podman_image:
     name: docker.io/library/nginx
     tag: latest
-    force: true
   register: deployerTaskN2
 
 - name: "Deployer - Nginx - Run Container"
@@ -315,3 +489,4 @@
     - (deployerTaskN1 is defined and deployerTaskN1.changed) or deployerTaskN1 is undefined or (deployerTaskN2 is defined and deployerTaskN2.changed) or deployerTaskN2 is undefined
   tags:
     - nginx
+    - www

tasks/installer.yml

@@ -12,14 +12,14 @@
     - "task.stdout.find('0 upgraded, 0 newly installed, 0 to remove') == -1"
 
 - name: "Init : Python 3 : Configure - Virtual Environment : Test"
-  ansible.builtin.raw: "~/.venv/ansible/bin/pip3"
+  ansible.builtin.raw: "/root/.venv/ansible/bin/pip3"
   register: task632
   changed_when: false
   failed_when: false
 
 - name: "Init : Python 3 : Configure - Virtual Environment : Delete"
   ansible.builtin.file:
-    path: "~/.venv/ansible"
+    path: "/root/.venv/ansible"
     state: absent
   when:
     - "task632.stdout.find(\"ModuleNotFoundError: No module named 'pip'\") != -1"
@@ -29,7 +29,7 @@
     name: pip
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
 
 - name: "Installer : Tools : Install"
@@ -50,15 +50,49 @@
       - pkg-config
       - etckeeper
       - picocom
+      - vlan
   loop: "{{ packages }}"
   loop_control:
     label: "{{ package }}"
     loop_var: "package"
 
-- name: "Installer : Network : Configure"
+- name: "Installer : Issue : Configure - Copy File"
   ansible.builtin.template:
-    src: './files/network/interfaces'
+    src: './files/issue'
+    dest: '/etc/{{ file }}'
+  vars:
+    files:
+      - "issue"
+      - "issue.net"
+  loop: "{{ files }}"
+  loop_control:
+    label: "{{ file }}"
+    loop_var: "file"
+  tags:
+    - issue
+
+- name: "Installer : Motd : Configure - Copy File"
+  ansible.builtin.template:
+    src: './files/motd'
+    dest: '/etc/motd'
+  tags:
+    - motd
+
+- name: "Installer : Networking : Configure - Copy Configuration"
+  ansible.builtin.template:
+    src: './files/networking/interfaces'
     dest: '/etc/network/interfaces'
+  tags:
+    - networking
+    - network
+
+- name: "Installer : Networking : Start - Restart Service"
+  ansible.builtin.systemd_service:
+    name: networking
+    state: restarted
+  tags:
+    - networking
+    - network
 
 - name: "Installer : FirewallD : Dependencies - Packages"
   ansible.builtin.apt:
@@ -66,17 +100,26 @@
       - python3-firewall
       - iptables
     state: latest
+  tags:
+    - firewalld
+    - firewall
 
 - name: "Installer : FirewallD : Install"
   ansible.builtin.apt:
     name: "firewalld"
     state: latest
+  tags:
+    - firewalld
+    - firewall
 
 - name: "Installer : FirewallD : Start"
   ansible.builtin.systemd_service:
     name: firewalld
     state: started
     enabled: true
+  tags:
+    - firewalld
+    - firewall
 
 - name: "Installer : FirewallD : Rules"
   ansible.posix.firewalld:
@@ -90,34 +133,37 @@
       - http
       - https
       - ssh
+      - dhcp
+      - dns
   loop: "{{ services }}"
   loop_control:
     label: "{{ service }}"
     loop_var: "service"
-
+  tags:
-
+    - firewalld
+    - firewall
 
 - name: "Installer - Ansible - Python Library"
   ansible.builtin.pip:
     name: ansible
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
   tags:
     - ansible
 
 - name: "Installer : Ansible : Create Folder"
   ansible.builtin.file:
-    path: ~/bin
+    path: /root/bin
     state: directory
   tags:
     - ansible
 
 - name: "Installer : Ansible : Create Symbolic Links"
   ansible.builtin.file:
-    src: ~/.venv/ansible/bin/{{ binary }}
+    src: /root/.venv/ansible/bin/{{ binary }}
-    dest: ~/bin/{{ binary }}
+    dest: /root/bin/{{ binary }}
     state: link
   vars:
     binaries:
@@ -139,12 +185,12 @@
   tags:
     - ansible
 
-- name: "Installer - Ansible - Dependencies / Python Libraries"
+- name: "Installer - Ansible - Dependencies - Python Libraries"
   ansible.builtin.pip:
     name: "{{ library }}"
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
   vars:
     libraries:
@@ -158,16 +204,27 @@
   loop_control:
     label: "{{ library }}"
     loop_var: "library"
+  tags:
+    - ansible
 
-- name: "Installer : MariaDB : Dependencies / Python Library : pymysql"
+- name: "Installer : MariaDB : Dependencies - Python Library : pymysql"
   ansible.builtin.pip:
     name: pymysql
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
   tags:
     - mariadb
+    - database
+
+- name: "Installer : MariaDB : Dependencies - Package : mariadb-client"
+  ansible.builtin.apt:
+    name: "mariadb-client"
+    state: latest
+  tags:
+    - mariadb
+    - database
 
 - name: "Installer : Podman : Install"
   ansible.builtin.apt:
@@ -178,13 +235,15 @@
       - buildah
       - slirp4netns
     state: latest
+  tags:
+    - podman
 
 - name: "Installer : Schedule : Maintenance"
   ansible.builtin.cron:
     name: "PVJJK 1.VOS TJAS - Infra - Maintenance"
     hour: "*/3"
     minute: "0"
-    job: "~/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d ~/.ansible/pull/pvjjk-1vos-tjas/infra --accept-host-key --private-key ~/.ssh/keys/pvjjk-1vos-tjas/infra --vault-password-file ~/.ansible/vault/pvjjk-1vos-tjas tasks.yml -t maintenance"
+    job: "/root/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d /root/.ansible/pull/pvjjk-1vos-niinisalo/infra --accept-host-key --private-key /root/.ssh/keys/pvjjk-1vos-niinisalo/infra --vault-password-file /root/.ansible/vault/pvjjk-1vos-niinisalo tasks.yml -t maintenance"
   tags:
     - cron
 
@@ -192,6 +251,6 @@
   ansible.builtin.cron:
     name: "PVJJK 1.VOS TJAS - Infra - Deployer"
     minute: "*/5"
-    job: "~/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d ~/.ansible/pull/pvjjk-1vos-tjas/infra --accept-host-key --private-key ~/.ssh/keys/pvjjk-1vos-tjas/infra --vault-password-file ~/.ansible/vault/pvjjk-1vos-tjas tasks.yml -t deployer"
+    job: "/root/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d /root/.ansible/pull/pvjjk-1vos-niinisalo/infra --accept-host-key --private-key /root/.ssh/keys/pvjjk-1vos-niinisalo/infra --vault-password-file /root/.ansible/vault/pvjjk-1vos-niinisalo tasks.yml -t deployer"
   tags:
     - cron

tasks/maintenance.yml

@@ -4,7 +4,7 @@
     name: "{{ library }}"
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
   vars:
     libraries:
@@ -24,7 +24,7 @@
     name: ansible
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
 
 - name: "Maintenance : MariaDB : Dependencies / Python Library : pymysql"
@@ -32,7 +32,7 @@
     name: pymysql
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
 
 - name: "Maintenance : Podman : Prune"