Rename olympus.intra.tjas to olympus.juva.tjas

INSTRUCTIONS.md

@@ -14,12 +14,12 @@
 
 r1.net.tjas
 ```
-!
 version 12.4
 service timestamps debug datetime msec
 service timestamps log datetime msec
 no service password-encryption
 !
+!
 hostname r1.net.tjas
 !
 boot-start-marker
@@ -61,28 +61,28 @@ interface FastEthernet0/1
 interface FastEthernet0/1.10
  description "TINU - INTERNET"
  encapsulation dot1Q 10
- ip address 192.168.1.1 255.255.255.0
+ ip address 192.168.1.1 255.255.255.224
  ip helper-address 192.168.2.10
  no snmp trap link-status
 !
 interface FastEthernet0/1.20
  description "JUVA - INTRA"
  encapsulation dot1Q 20
- ip address 192.168.2.1 255.255.255.0
+ ip address 192.168.2.1 255.255.255.224
  ip helper-address 192.168.2.10
  no snmp trap link-status
 !
 interface FastEthernet0/1.30
  description "AITO - TOIMISTO"
  encapsulation dot1Q 30
- ip address 192.168.3.1 255.255.255.0
+ ip address 192.168.3.1 255.255.255.224
  ip helper-address 192.168.2.10
  no snmp trap link-status
 !
 interface FastEthernet0/1.69
  description "SIVE - HALLINTA"
  encapsulation dot1Q 69
- ip address 192.168.69.1 255.255.255.0
+ ip address 192.168.69.1 255.255.255.192
  ip helper-address 192.168.69.20
  no snmp trap link-status
 !
@@ -95,11 +95,6 @@ ip classless
 !
 ip http server
 !
-access-list 1 permit 192.168.0.0
-access-list 1 permit 192.168.1.0
-access-list 1 permit 192.168.2.0
-access-list 1 permit 192.168.3.0
-access-list 1 deny   any
 !
 control-plane
 !
@@ -126,26 +121,27 @@ vlan 1
    exit
 vlan 10
    name "TINU"
-   ip address 192.168.1.2 255.255.255.0
+   ip address 192.168.1.2 255.255.255.224
    tagged 1
    exit
 vlan 20
    name "JUVA"
+   no ip address
    tagged 1-2
    exit
 vlan 30
    name "AITO"
+   no ip address
    tagged 1,3
    exit
 vlan 69
    name "SIVE"
-   ip address 192.168.69.11 255.255.255.0
-   tagged 1,2,3
+   ip address 192.168.69.11 255.255.255.192
+   tagged 1-3
    exit
-ip authorized-managers 192.168.69.20
+ip authorized-managers 192.168.69.20 255.255.255.255
 ip ssh
 password manager
-
 ```
 
 s2.net.tjas
@@ -161,13 +157,13 @@ vlan 1
 vlan 20
    name "JUVA"
    untagged 2-24
-   ip address 192.168.2.2 255.255.255.0
-   tagged 1
+   ip address 192.168.2.2 255.255.255.224
+   tagged 1-2
    exit
 vlan 69
    name "SIVE"
-   ip address 192.168.69.12 255.255.255.0
-   tagged 1,2
+   ip address 192.168.69.12 255.255.255.192
+   tagged 1-2
    exit
 ip authorized-managers 192.168.69.20 255.255.255.255
 ip ssh
@@ -186,14 +182,14 @@ vlan 1
    exit
 vlan 30
    name "AITO"
-   untagged 2-24
-   ip address 192.168.3.2 255.255.255.0
-   tagged 1
+   ip address 192.168.3.2 255.255.255.224
+   tagged 1,13-24
+   untagged
    exit
 vlan 69
    name "SIVE"
    untagged 2-24
-   ip address 192.168.69.13 255.255.255.0
+   ip address 192.168.69.13 255.255.255.192
    tagged 1
    exit
 ip authorized-managers 192.168.69.20 255.255.255.255

files/dhcp/dhcpd.conf

@@ -106,20 +106,85 @@ authoritative;
 #  }
 #}
 
-subnet 192.168.1.0 netmask 255.255.255.0 {
-    range 192.168.1.2 192.168.1.254;
+subnet 192.168.1.0 netmask 255.255.255.240 {
+    range 192.168.1.2 192.168.1.14;
     option routers 192.168.1.1;
-    option broadcast-address 192.168.1.255;
+    option broadcast-address 192.168.1.15;
+
+    host r1.net.tjas {
+        hardware ethernet 00:1d:46:dc:80:09;
+        fixed-address 192.168.1.1;
+    }
+
+    host s1.net.tjas {
+        hardware ethernet 9c:8e:99:9b:c3:80;
+        fixed-address 192.168.1.2;
+    }
 }
 
-subnet 192.168.2.0 netmask 255.255.255.0 {
-    range 192.168.2.2 192.168.2.254;
+subnet 192.168.2.0 netmask 255.255.255.224 {
+    range 192.168.2.2 192.168.2.30;
     option routers 192.168.2.1;
-    option broadcast-address 192.168.2.255;
+    option broadcast-address 192.168.2.31;
+
+    host r1.net.tjas {
+        hardware ethernet 00:1d:46:dc:80:09;
+        fixed-address 192.168.2.1;
+    }
+
+    host s2.net.tjas {
+        hardware ethernet 00:24:a8:f1:c7:40;
+        fixed-address 192.168.2.2;
+    }
+
+    host olympus.intra.tjas {
+        hardware ethernet 90:1b:0e:5b:18:fa;
+        fixed-address 192.168.2.10;
+    }
 }
 
-subnet 192.168.3.0 netmask 255.255.255.0 {
-    range 192.168.3.2 192.168.3.254;
+subnet 192.168.3.0 netmask 255.255.255.224 {
+    range 192.168.3.2 192.168.3.30;
     option routers 192.168.3.1;
-    option broadcast-address 192.168.3.255;
+    option broadcast-address 192.168.3.31;
+
+    host r1.net.tjas {
+        hardware ethernet 00:1d:46:dc:80:09;
+        fixed-address 192.168.3.1;
+    }
+
+    host s3.net.tjas {
+        hardware ethernet 00:1f:fe:ab:9e:c0;
+        fixed-address 192.168.3.2;
+    }
+}
+
+subnet 192.168.69.0 netmask 255.255.255.192 {
+    range 192.168.69.2 192.168.69.62;
+    option broadcast-address 192.168.69.63;
+
+    host r1.net.tjas {
+        hardware ethernet 00:1d:46:dc:80:09;
+        fixed-address 192.168.69.1;
+    }
+
+    host s1.net.tjas {
+        hardware ethernet 9c:8e.99:9b:c3:80;
+        fixed-address 192.168.3.11;
+    }
+
+    host s2.net.tjas {
+        hardware ethernet 00:24:a8:f1:c7:40;
+        fixed-address 192.168.3.12;
+    }
+
+    host s3.net.tjas {
+        hardware ethernet 00:1f:fe:ab:9e:c0;
+        fixed-address 192.168.3.13;
+    }
+
+    host olympus.intra.tjas {
+        hardware ethernet 90:1b:0e:5b:18:fa;
+        fixed-address 192.168.69.20;
+    }
 }

files/kea/kea-dhcp4.conf

@@ -0,0 +1,461 @@
+// This is a basic configuration for the Kea DHCPv4 server. Subnet declarations
+// are mostly commented out and no interfaces are listed. Therefore, the servers
+// will not listen or respond to any queries.
+// The basic configuration must be extended to specify interfaces on which
+// the servers should listen. There are a number of example options defined.
+// These probably don't make any sense in your network. Make sure you at least
+// update the following, before running this example in your network:
+// - change the network interface names
+// - change the subnets to match your actual network
+// - change the option values to match your network
+//
+// This is just a very basic configuration. Kea comes with large suite (over 30)
+// of configuration examples and extensive Kea User's Guide. Please refer to
+// those materials to get better understanding of what this software is able to
+// do. Comments in this configuration file sometimes refer to sections for more
+// details. These are section numbers in Kea User's Guide. The version matching
+// your software should come with your Kea package, but it is also available
+// in ISC's Knowledgebase (https://kea.readthedocs.io; the direct link for
+// the stable version is https://kea.readthedocs.io/).
+//
+// This configuration file contains only DHCPv4 server's configuration.
+// If configurations for other Kea services are also included in this file they
+// are ignored by the DHCPv4 server.
+{
+
+// DHCPv4 configuration starts here. This section will be read by DHCPv4 server
+// and will be ignored by other components.
+"Dhcp4": {
+    // Add names of your network interfaces to listen on.
+    "interfaces-config": {
+        // See section 8.2.4 for more details. You probably want to add just
+        // interface name (e.g. "eth0" or specific IPv4 address on that
+        // interface name (e.g. "eth0/192.0.2.1").
+        "interfaces": [ ]
+
+        // Kea DHCPv4 server by default listens using raw sockets. This ensures
+        // all packets, including those sent by directly connected clients
+        // that don't have IPv4 address yet, are received. However, if your
+        // traffic is always relayed, it is often better to use regular
+        // UDP sockets. If you want to do that, uncomment this line:
+        // "dhcp-socket-type": "udp"
+    },
+
+    // Kea supports control channel, which is a way to receive management
+    // commands while the server is running. This is a Unix domain socket that
+    // receives commands formatted in JSON, e.g. config-set (which sets new
+    // configuration), config-reload (which tells Kea to reload its
+    // configuration from file), statistic-get (to retrieve statistics) and many
+    // more. For detailed description, see Sections 8.8, 16 and 15.
+    "control-socket": {
+        "socket-type": "unix",
+        "socket-name": "/run/kea/kea4-ctrl-socket"
+    },
+
+    // Use Memfile lease database backend to store leases in a CSV file.
+    // Depending on how Kea was compiled, it may also support SQL databases
+    // (MySQL and/or PostgreSQL). Those database backends require more
+    // parameters, like name, host and possibly user and password.
+    // There are dedicated examples for each backend. See Section 7.2.2 "Lease
+    // Storage" for details.
+    "lease-database": {
+        // Memfile is the simplest and easiest backend to use. It's an in-memory
+        // C++ database that stores its state in CSV file.
+        "type": "memfile",
+        "lfc-interval": 3600
+    },
+
+    // Kea allows storing host reservations in a database. If your network is
+    // small or you have few reservations, it's probably easier to keep them
+    // in the configuration file. If your network is large, it's usually better
+    // to use database for it. To enable it, uncomment the following:
+    // "hosts-database": {
+    //     "type": "mysql",
+    //     "name": "kea",
+    //     "user": "kea",
+    //     "password": "kea",
+    //     "host": "localhost",
+    //     "port": 3306
+    // },
+    // See Section 7.2.3 "Hosts storage" for details.
+
+    // Setup reclamation of the expired leases and leases affinity.
+    // Expired leases will be reclaimed every 10 seconds. Every 25
+    // seconds reclaimed leases, which have expired more than 3600
+    // seconds ago, will be removed. The limits for leases reclamation
+    // are 100 leases or 250 ms for a single cycle. A warning message
+    // will be logged if there are still expired leases in the
+    // database after 5 consecutive reclamation cycles.
+    "expired-leases-processing": {
+        "reclaim-timer-wait-time": 10,
+        "flush-reclaimed-timer-wait-time": 25,
+        "hold-reclaimed-time": 3600,
+        "max-reclaim-leases": 100,
+        "max-reclaim-time": 250,
+        "unwarned-reclaim-cycles": 5
+    },
+
+    // Global timers specified here apply to all subnets, unless there are
+    // subnet specific values defined in particular subnets.
+    "renew-timer": 900,
+    "rebind-timer": 1800,
+    "valid-lifetime": 3600,
+
+    // Many additional parameters can be specified here:
+    // - option definitions (if you want to define vendor options, your own
+    //                       custom options or perhaps handle standard options
+    //                       that Kea does not support out of the box yet)
+    // - client classes
+    // - hooks
+    // - ddns information (how the DHCPv4 component can reach a DDNS daemon)
+    //
+    // Some of them have examples below, but there are other parameters.
+    // Consult Kea User's Guide to find out about them.
+
+    // These are global options. They are going to be sent when a client
+    // requests them, unless overwritten with values in more specific scopes.
+    // The scope hierarchy is:
+    // - global (most generic, can be overwritten by class, subnet or host)
+    // - class (can be overwritten by subnet or host)
+    // - subnet (can be overwritten by host)
+    // - host (most specific, overwrites any other scopes)
+    //
+    // Not all of those options make sense. Please configure only those that
+    // are actually useful in your network.
+    //
+    // For a complete list of options currently supported by Kea, see
+    // Section 7.2.8 "Standard DHCPv4 Options". Kea also supports
+    // vendor options (see Section 7.2.10) and allows users to define their
+    // own custom options (see Section 7.2.9).
+    "option-data": [
+        // When specifying options, you typically need to specify
+        // one of (name or code) and data. The full option specification
+        // covers name, code, space, csv-format and data.
+        // space defaults to "dhcp4" which is usually correct, unless you
+        // use encapsulate options. csv-format defaults to "true", so
+        // this is also correct, unless you want to specify the whole
+        // option value as long hex string. For example, to specify
+        // domain-name-servers you could do this:
+        // {
+        //     "name": "domain-name-servers",
+        //     "code": 6,
+        //     "csv-format": "true",
+        //     "space": "dhcp4",
+        //     "data": "192.0.2.1, 192.0.2.2"
+        // }
+        // but it's a lot of writing, so it's easier to do this instead:
+        {
+            "name": "domain-name-servers",
+            "data": "192.0.2.1, 192.0.2.2"
+        },
+
+        // Typically people prefer to refer to options by their names, so they
+        // don't need to remember the code names. However, some people like
+        // to use numerical values. For example, option "domain-name" uses
+        // option code 15, so you can reference to it either by
+        // "name": "domain-name" or "code": 15.
+        {
+            "code": 15,
+            "data": "example.org"
+        },
+
+        // Domain search is also a popular option. It tells the client to
+        // attempt to resolve names within those specified domains. For
+        // example, name "foo" would be attempted to be resolved as
+        // foo.mydomain.example.com and if it fails, then as foo.example.com
+        {
+            "name": "domain-search",
+            "data": "mydomain.example.com, example.com"
+        },
+
+        // String options that have a comma in their values need to have
+        // it escaped (i.e. each comma is preceded by two backslashes).
+        // That's because commas are reserved for separating fields in
+        // compound options. At the same time, we need to be conformant
+        // with JSON spec, that does not allow "\,". Therefore the
+        // slightly uncommon double backslashes notation is needed.
+
+        // Legal JSON escapes are \ followed by "\/bfnrt character
+        // or \u followed by 4 hexadecimal numbers (currently Kea
+        // supports only \u0000 to \u00ff code points).
+        // CSV processing translates '\\' into '\' and '\,' into ','
+        // only so for instance '\x' is translated into '\x'. But
+        // as it works on a JSON string value each of these '\'
+        // characters must be doubled on JSON input.
+        {
+            "name": "boot-file-name",
+            "data": "EST5EDT4\\,M3.2.0/02:00\\,M11.1.0/02:00"
+        },
+
+        // Options that take integer values can either be specified in
+        // dec or hex format. Hex format could be either plain (e.g. abcd)
+        // or prefixed with 0x (e.g. 0xabcd).
+        {
+            "name": "default-ip-ttl",
+            "data": "0xf0"
+        }
+
+        // Note that Kea provides some of the options on its own. In particular,
+        // it sends IP Address lease type (code 51, based on valid-lifetime
+        // parameter, Subnet mask (code 1, based on subnet definition), Renewal
+        // time (code 58, based on renew-timer parameter), Rebind time (code 59,
+        // based on rebind-timer parameter).
+    ],
+
+    // Other global parameters that can be defined here are option definitions
+    // (this is useful if you want to use vendor options, your own custom
+    // options or perhaps handle options that Kea does not handle out of the box
+    // yet).
+
+    // You can also define classes. If classes are defined, incoming packets
+    // may be assigned to specific classes. A client class can represent any
+    // group of devices that share some common characteristic, e.g. Windows
+    // devices, iphones, broken printers that require special options, etc.
+    // Based on the class information, you can then allow or reject clients
+    // to use certain subnets, add special options for them or change values
+    // of some fixed fields.
+    "client-classes": [
+        {
+            // This specifies a name of this class. It's useful if you need to
+            // reference this class.
+            "name": "voip",
+
+            // This is a test. It is an expression that is being evaluated on
+            // each incoming packet. It is supposed to evaluate to either
+            // true or false. If it's true, the packet is added to specified
+            // class. See Section 12 for a list of available expressions. There
+            // are several dozens. Section 8.2.14 for more details for DHCPv4
+            // classification and Section 9.2.19 for DHCPv6.
+            "test": "substring(option[60].hex,0,6) == 'Aastra'",
+
+            // If a client belongs to this class, you can define extra behavior.
+            // For example, certain fields in DHCPv4 packet will be set to
+            // certain values.
+            "next-server": "192.0.2.254",
+            "server-hostname": "hal9000",
+            "boot-file-name": "/dev/null"
+
+            // You can also define option values here if you want devices from
+            // this class to receive special options.
+        }
+    ],
+
+    // Another thing possible here are hooks. Kea supports a powerful mechanism
+    // that allows loading external libraries that can extract information and
+    // even influence how the server processes packets. Those libraries include
+    // additional forensic logging capabilities, ability to reserve hosts in
+    // more flexible ways, and even add extra commands. For a list of available
+    // hook libraries, see https://gitlab.isc.org/isc-projects/kea/wikis/Hooks-available.
+    // "hooks-libraries": [
+    //   {
+    //       // Forensic Logging library generates forensic type of audit trail
+    //       // of all devices serviced by Kea, including their identifiers
+    //       // (like MAC address), their location in the network, times
+    //       // when they were active etc.
+    //       "library": "/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_legal_log.so",
+    //       "parameters": {
+    //           "path": "/var/lib/kea",
+    //           "base-name": "kea-forensic4"
+    //       }
+    //   },
+    //   {
+    //       // Flexible identifier (flex-id). Kea software provides a way to
+    //       // handle host reservations that include addresses, prefixes,
+    //       // options, client classes and other features. The reservation can
+    //       // be based on hardware address, DUID, circuit-id or client-id in
+    //       // DHCPv4 and using hardware address or DUID in DHCPv6. However,
+    //       // there are sometimes scenario where the reservation is more
+    //       // complex, e.g. uses other options that mentioned above, uses part
+    //       // of specific options or perhaps even a combination of several
+    //       // options and fields to uniquely identify a client. Those scenarios
+    //       // are addressed by the Flexible Identifiers hook application.
+    //       "library": "/usr/lib/x86_64-linux-gnu/kea/hooks/libdhcp_flex_id.so",
+    //       "parameters": {
+    //           "identifier-expression": "relay4[2].hex"
+    //       }
+    //   }
+    // ],
+
+    // Below an example of a simple IPv4 subnet declaration. Uncomment to enable
+    // it. This is a list, denoted with [ ], of structures, each denoted with
+    // { }. Each structure describes a single subnet and may have several
+    // parameters. One of those parameters is "pools" that is also a list of
+    // structures.
+    "subnet4": [
+        {
+            // This defines the whole subnet. Kea will use this information to
+            // determine where the clients are connected. This is the whole
+            // subnet in your network. This is mandatory parameter for each
+            // subnet.
+            "subnet": "192.0.2.0/24",
+
+            // Pools define the actual part of your subnet that is governed
+            // by Kea. Technically this is optional parameter, but it's
+            // almost always needed for DHCP to do its job. If you omit it,
+            // clients won't be able to get addresses, unless there are
+            // host reservations defined for them.
+            "pools": [ { "pool": "192.0.2.1 - 192.0.2.200" } ],
+
+            // These are options that are subnet specific. In most cases,
+            // you need to define at least routers option, as without this
+            // option your clients will not be able to reach their default
+            // gateway and will not have Internet connectivity.
+            "option-data": [
+                {
+                    // For each IPv4 subnet you most likely need to specify at
+                    // least one router.
+                    "name": "routers",
+                    "data": "192.0.2.1"
+                }
+            ],
+
+            // Kea offers host reservations mechanism. Kea supports reservations
+            // by several different types of identifiers: hw-address
+            // (hardware/MAC address of the client), duid (DUID inserted by the
+            // client), client-id (client identifier inserted by the client) and
+            // circuit-id (circuit identifier inserted by the relay agent).
+            //
+            // Kea also support flexible identifier (flex-id), which lets you
+            // specify an expression that is evaluated for each incoming packet.
+            // Resulting value is then used for as an identifier.
+            //
+            // Note that reservations are subnet-specific in Kea. This is
+            // different than ISC DHCP. Keep that in mind when migrating
+            // your configurations.
+            "reservations": [
+
+                // This is a reservation for a specific hardware/MAC address.
+                // It's a rather simple reservation: just an address and nothing
+                // else.
+                {
+                    "hw-address": "1a:1b:1c:1d:1e:1f",
+                    "ip-address": "192.0.2.201"
+                },
+
+                // This is a reservation for a specific client-id. It also shows
+                // the this client will get a reserved hostname. A hostname can
+                // be defined for any identifier type, not just client-id.
+                {
+                    "client-id": "01:11:22:33:44:55:66",
+                    "ip-address": "192.0.2.202",
+                    "hostname": "special-snowflake"
+                },
+
+                // The third reservation is based on DUID. This reservation defines
+                // a special option values for this particular client. If the
+                // domain-name-servers option would have been defined on a global,
+                // subnet or class level, the host specific values take preference.
+                {
+                    "duid": "01:02:03:04:05",
+                    "ip-address": "192.0.2.203",
+                    "option-data": [ {
+                        "name": "domain-name-servers",
+                        "data": "10.1.1.202, 10.1.1.203"
+                    } ]
+                },
+
+                // The fourth reservation is based on circuit-id. This is an option
+                // inserted by the relay agent that forwards the packet from client
+                // to the server.  In this example the host is also assigned vendor
+                // specific options.
+                //
+                // When using reservations, it is useful to configure
+                // reservations-global, reservations-in-subnet,
+                // reservations-out-of-pool (subnet specific parameters)
+                // and host-reservation-identifiers (global parameter).
+                {
+                    "client-id": "01:12:23:34:45:56:67",
+                    "ip-address": "192.0.2.204",
+                    "option-data": [
+                        {
+                            "name": "vivso-suboptions",
+                            "data": "4491"
+                        },
+                        {
+                            "name": "tftp-servers",
+                            "space": "vendor-4491",
+                            "data": "10.1.1.202, 10.1.1.203"
+                        }
+                    ]
+                },
+                // This reservation is for a client that needs specific DHCPv4
+                // fields to be set. Three supported fields are next-server,
+                // server-hostname and boot-file-name
+                {
+                    "client-id": "01:0a:0b:0c:0d:0e:0f",
+                    "ip-address": "192.0.2.205",
+                    "next-server": "192.0.2.1",
+                    "server-hostname": "hal9000",
+                    "boot-file-name": "/dev/null"
+                },
+                // This reservation is using flexible identifier. Instead of
+                // relying on specific field, sysadmin can define an expression
+                // similar to what is used for client classification,
+                // e.g. substring(relay[0].option[17],0,6). Then, based on the
+                // value of that expression for incoming packet, the reservation
+                // is matched. Expression can be specified either as hex or
+                // plain text using single quotes.
+                //
+                // Note: flexible identifier requires flex_id hook library to be
+                // loaded to work.
+                {
+                    "flex-id": "'s0mEVaLue'",
+                    "ip-address": "192.0.2.206"
+                }
+                // You can add more reservations here.
+            ]
+            // You can add more subnets there.
+        }
+    ],
+
+    // There are many, many more parameters that DHCPv4 server is able to use.
+    // They were not added here to not overwhelm people with too much
+    // information at once.
+
+    // Logging configuration starts here. Kea uses different loggers to log various
+    // activities. For details (e.g. names of loggers), see Chapter 18.
+    "loggers": [
+    {
+        // This section affects kea-dhcp4, which is the base logger for DHCPv4
+        // component. It tells DHCPv4 server to write all log messages (on
+        // severity INFO or more) to a file.
+        "name": "kea-dhcp4",
+        "output_options": [
+            {
+                // Specifies the output file. There are several special values
+                // supported:
+                // - stdout (prints on standard output)
+                // - stderr (prints on standard error)
+                // - syslog (logs to syslog)
+                // - syslog:name (logs to syslog using specified name)
+                // Any other value is considered a name of the file
+                "output": "stdout",
+
+                // Shorter log pattern suitable for use with systemd,
+                // avoids redundant information
+                "pattern": "%-5p %m\n",
+
+                // This governs whether the log output is flushed to disk after
+                // every write.
+                // "flush": false,
+
+                // This specifies the maximum size of the file before it is
+                // rotated.
+                // "maxsize": 1048576,
+
+                // This specifies the maximum number of rotated files to keep.
+                // "maxver": 8
+            }
+        ],
+        // This specifies the severity of log messages to keep. Supported values
+        // are: FATAL, ERROR, WARN, INFO, DEBUG
+        "severity": "ERROR",
+
+        // If DEBUG level is specified, this value is used. 0 is least verbose,
+        // 99 is most verbose. Be cautious, Kea can generate lots and lots
+        // of logs if told to do so.
+        "debuglevel": 0
+    }
+  ]
+}
+}

init.sh

@@ -35,32 +35,32 @@ ti-header "Asennetaan PVJJK 1.VOS TJAS Infran riippuvuudet APT-paketinhallinnall
 apt-get install -y python3-pip python3-venv jq git curl lsb-release
 echo -e "\n\n"
 
-mkdir -p ~/.ssh/keys/pvjjk-1vos-tjas &> /dev/null
-if [[ ! -f ~/.ssh/keys/pvjjk-1vos-tjas/infra ]]
+mkdir -p /root/.ssh/keys/pvjjk-1vos-tjas &> /dev/null
+if [[ ! -f /root/.ssh/keys/pvjjk-1vos-tjas/infra ]]
 then
     ti-header "Generoidaan SSH-avain Infra-repon käyttöön..."
-    ssh-keygen -f ~/.ssh/keys/pvjjk-1vos-tjas/infra -t ed25519 -N '' -C $(hostname --fqdn)
+    ssh-keygen -f /root/.ssh/keys/pvjjk-1vos-tjas/infra -t ed25519 -N '' -C $(hostname --fqdn)
     echo -e "\n\n"
 fi
 
 ti-header "Luodaan Ansiblelle virtuaalinen ympäristö..."
-python3 -m venv ~/.venv/ansible
+python3 -m venv /root/.venv/ansible
 echo -e "\n\n"
 
 ti-header "Asennetaan Ansiblen riippuvuudet..."
-~/.venv/ansible/bin/pip3 install cryptography dnspython hvac jmespath netaddr pexpect
+/root/.venv/ansible/bin/pip3 install cryptography dnspython hvac jmespath netaddr pexpect
 echo -e "\n\n"
 
 ti-header "Asennetaan Ansible..."
-~/.venv/ansible/bin/pip3 install ansible
+/root/.venv/ansible/bin/pip3 install ansible
 echo -e "\n\n"
 
 ti-header "Asennetaan Ansible kokoelmat..."
-~/.venv/ansible/bin/ansible-galaxy collection install ansible.posix containers.podman --upgrade
+/root/.venv/ansible/bin/ansible-galaxy collection install ansible.posix containers.podman --upgrade
 echo -e "\n\n"
 
 ti-header "Lisää SSH-avain Infra-repon käyttöön..."
-cat ~/.ssh/keys/pvjjk-1vos-tjas/infra.pub
+cat /root/.ssh/keys/pvjjk-1vos-tjas/infra.pub
 
 echo -n "Onko avain lisätty Github-repoon? [K/E]"
 while [[ -z $SSHKEY_QUESTION || ! -z $SSHKEY_QUESTION && $SSHKEY_QUESTION != "K" ]]
@@ -69,8 +69,8 @@ do
 done
 echo -e "\n\n"
 
-mkdir -p ~/.ansible/vault &> /dev/null
-if [[ ! -f ~/.ansible/vault/pvjjk-1vos-tjas ]]
+mkdir -p /root/.ansible/vault &> /dev/null
+if [[ ! -f /root/.ansible/vault/pvjjk-1vos-tjas ]]
 then
     ti-header "Syötä Ansible Vaultin salasana..."
     echo -n "Salasana: "
@@ -80,14 +80,14 @@ then
 
         if [[ ! -z $VAULT_PASSWORD ]]
         then
-            echo "$VAULT_PASSWORD" > ~/.ansible/vault/pvjjk-1vos-tjas
+            echo "$VAULT_PASSWORD" > /root/.ansible/vault/pvjjk-1vos-tjas
         fi
     done
     echo -e "\n\n"
 fi
 
 ti-header "Suoritetaan Infran asennus..."
-~/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d ~/.ansible/pull/pvjjk-1vos-tjas/infra --accept-host-key --private-key ~/.ssh/keys/pvjjk-1vos-tjas/infra --vault-password-file ~/.ansible/vault/pvjjk-1vos-tjas tasks.yml -t installer
+/root/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d /root/.ansible/pull/pvjjk-1vos-tjas/infra --accept-host-key --private-key /root/.ssh/keys/pvjjk-1vos-tjas/infra --vault-password-file /root/.ansible/vault/pvjjk-1vos-tjas tasks.yml -t installer
 echo -e "\n\n"
 
 echo "

inventories/pvjjk-1vos-tjas/host_vars/olympus.intra.tjas

@@ -1,34 +0,0 @@
-$ANSIBLE_VAULT;1.2;AES256;pvjjk-1vos-tjas
-33376562363863333566646437313135363332623231643964346461613335623062303161643566
-3038343664303937646664393536356463633966613633320a626663353131613163316234316433
-31323230383964383634636338333836613264613064316664616537313934303830303166386633
-6363653364646434360a633235636339336531666234666134666166653539623634343363643161
-33656438306262356132346163626566656166653333643465366136653465373535353838383439
-64626663376536633834336564663665353632393537326366313130633330646562666238353936
-30363230323330316534343165373433663036393866626438613035636339616164303761333135
-65316437663663663764663463333833663937346636383364303366393264393061383164353533
-33323230383464313565316134346334343565643331653333316437396461633133323662626635
-61633362303261643039313566616537316333346562366165373961383734663934653236663934
-39653261663730373136363130626332303836636362613661306164643361363062353864393465
-66383833653261383562313939656465623736656132383530313739313264356335616631613864
-30373338346563346361383462336338303235306139346530363665376335363230386232323734
-61316463656135356431313236613132323937303533356433376633626462303632616462663730
-30313163306233616164306136643032393839353230373439653363323863383266363432356438
-35366361623731353934646230333165636635346166366530633863343936393138306534343563
-65396136656438613931313965396638353333313962663133663632613430396331656230356264
-66343731396534633761323863303936323937306334366539346264373936663231613961313637
-65306161356539366234613131386565343666653133363635336335316263663431373837636636
-63633232623733343932363862366233326666626164313330353830383563316533636539636263
-35386339393663623739623663396333643662343031363530343738663833663166313632376433
-63303861633063333365306137373739633030393133333733636266306237383034653635396664
-32373831636435613235623862613037663838333731386336656665646634373339626637653661
-30343435323934626538353631383533363163633662326263646364383437383961656136626664
-61306662646435343538333737386535623763376566373833393133353030346563326136383435
-66363838343539383462313933366531333339333032363530636235633461316162643065313333
-36633338326530653336353030363536363932663038373337653766373630313237343536323762
-66633137383631333333386532303864633930663031653639373438643564613338646463623963
-31323366373330346430393435393638363032613864633334303138363765363162613638346234
-31633831313535373862646132616562623532303266623666333164613638646339643838333839
-31623533393830353234303664313662373737373139323035366430646266393939626333376136
-33346432356339323732393864363838656430633035303864636436393066393531333030636337
-61333432666539333534383663313964636433306161353465346366333766623138

inventories/pvjjk-1vos-tjas/host_vars/olympus.juva.tjas

@@ -0,0 +1,41 @@
+$ANSIBLE_VAULT;1.2;AES256;pvjjk-1vos-tjas
+32353036303137643762623464643039333838656134613535633764316264623731656663323435
+6431613031346665633266366338373135393265303933340a613665656364346562636230383130
+34316235316631646161346636383634666137636336396664656337633764643438383565656434
+3465656532396265640a643435346535653665656263346564366238316333363536646563623033
+34363530373732613561623830663832643237613230323136373635343434366361626435623061
+61343832336661656366646564633464306237326330386533633965366631636431666162666134
+31306631363131343962663962643432383965303931346238313663623539336535353930323538
+36643164623537663531393039643437623833366135643862666237303961663132643762346235
+66376662623838636361383436366562393462313430303163653664316162316339356333653936
+63353365326166643463306139306134363932646465343634633465333634373033623561643130
+32333566353562336534663134336234383663663464333430333962383836323539323031363166
+38343632626237636337386362633630383934303437623461316539386235323231663564613233
+33383532313738613762633532646266623431376164663864386237346130316530613161373337
+62323764383161663234626639326638316334346236353836356463376239353033616636636636
+37376265656432353262393966636230363265353236643638343465623365343639313030336236
+36363163373366376232393961613231373730616564363630383336613266303238386133316533
+62373766666333613461353430316664663364333266363761333339356561303637396164663565
+62636261303233353235383632623132636533616264346463396566386462656135383534666333
+38656439323732383534343632353161393364393537626262383465666462323336633764393866
+33623639373138636233646335623630613533386565326363323830313036616635343133656638
+35323862353338653637663863643031643765313236666664656162356166663663656366306134
+64613138623464353839316163653239356238313834616661336130306539393039393439653466
+34316664356166376665333031666164356239623332383330346332613364643561313731653336
+30613864316665366533316263356561343030346535623764313264323765633035663237633530
+30383566303661613332353631663163363334336436333665363965383963356265613731616231
+38613632633430346531326134396333363533626466616565623432383031313037656161313764
+33656230343539316464336533613864373332343231396134396161653137393338396361336330
+34333265333738663330636161333035313831626134633062363265373734303733313131636164
+34616435633965356263346633326135333865393565316138633337323635323164343338653566
+35373366633432666131366436336633323039653466313338326362636262323735393865663939
+62353963656539366662336666353635626135653166633630333937363634343534626465626463
+61616632643131323237353362373766323663633936623334336231653037323539303533656439
+30343133623436626630343462363861336630386664303362646338663630396131393461323931
+30373432643235636136396661326439616434363563333334343534346465663538623936326636
+36393636323438366639306262386437363936313064616534326633353439646137316337313061
+39326239653434313438386331613631393063376433646531383361363434613934306633323230
+39393965643762623330373661333032326363636134653838336162623564653933353265613233
+37623632633437356365366265303937356139623237353964646166373036393864613935303233
+36323665316664333362356132653235663035303135313733613632616134316365656662333839
+65653162663265626438

inventories/pvjjk-1vos-tjas/hosts.yml

@@ -1,6 +1,6 @@
 ---
 pvjjk_1vos_tjas:
   hosts:
-    olympus.intra.tjas:
+    olympus.juva.tjas:
   vars:
     ansible_python_interpreter: /usr/bin/python3

tasks/deployer.yml

@@ -2,7 +2,7 @@
 - name: "Deployer - SSH - Add Authorized Keys"
   ansible.builtin.template:
     src: './files/ssh/authorized_keys'
-    dest: '~/.ssh/authorized_keys'
+    dest: '/root/.ssh/authorized_keys'
   tags:
     - ssh
 
@@ -24,14 +24,14 @@
 
 - name: "Deployer - Yggdrasil - Configure - Create Folder"
   ansible.builtin.file:
-    path: "~/data/yggdrasil/"
+    path: "/root/data/yggdrasil/"
     state: directory
   tags:
     - yggdrasil
 
 - name: "Deployer - Yggdrasil - Configure - Create Subfolders"
   ansible.builtin.file:
-    dest: '~/data/yggdrasil/{{ item.path }}'
+    dest: '/root/data/yggdrasil/{{ item.path }}'
     state: directory
   with_filetree: './files/yggdrasil/'
   loop_control:
@@ -44,7 +44,7 @@
 - name: "Deployer - Yggdrasil - Configure - Generating & Transferring Files"
   ansible.builtin.template:
     src: '{{ item.src }}'
-    dest: '~/data/yggdrasil/{{ item.path }}'
+    dest: '/root/data/yggdrasil/{{ item.path }}'
   register: deployerTaskY1
   with_filetree: './files/yggdrasil/'
   loop_control:
@@ -69,9 +69,9 @@
 
 - name: "Deployer - Yggdrasil - Pull Image"
   containers.podman.podman_image:
-    name: pvjjk-1vos-tjas/nginx
+    name: pvjjk-1vos-tjas/yggdrasil
     tag: latest
-    path: "~/data/yggdrasil"
+    path: "/root/data/yggdrasil"
     build:
       format: docker
     force: true
@@ -80,7 +80,7 @@
 - name: "Deployer - Yggdrasil - Run Container"
   containers.podman.podman_container:
     name: yggdrasil
-    image: pvjjk-1vos-tjas/nginx:latest
+    image: pvjjk-1vos-tjas/yggdrasil:latest
     state: started
     recreate: on
     network: host
@@ -96,31 +96,9 @@
   tags:
     - yggdrasil
 
-# - name: "Deployer - DHCP - Install"
-#   ansible.builtin.apt:
-#     name:
-#       - isc-dhcp-server
-#     state: latest
-
-# - name: "Deployer - DHCP - Config"
-#   ansible.builtin.template:
-#     src: './files/dhcp/dhcpd.conf'
-#     dest: '/etc/dhcp/dhcpd.conf'
-#   register: deployerTaskD1
-#   tags:
-#     - dhcp
-
-# - name: "Deployer : DHCP : Restart"
-#   ansible.builtin.systemd_service:
-#     name: isc-dhcp-server
-#     state: restarted
-#     enabled: true
-#   when:
-#     - (deployerTaskD1 is defined and deployerTaskD1.changed) or deployerTaskD1 is undefined
-
 - name: "Deployer - MariaDB - Create Folder"
   ansible.builtin.file:
-    path: ~/data/mariadb
+    path: /root/data/mariadb
     state: directory
   tags:
     - mariadb
@@ -140,7 +118,7 @@
     restart: on
     network: host
     volumes:
-      - "~/data/mariadb:/var/lib/mysql"
+      - "/root/data/mariadb:/var/lib/mysql"
     restart_policy: always
     env:
       MYSQL_ROOT_PASSWORD: "{{ config.mariadb.users.root.password }}"
@@ -205,16 +183,38 @@
   tags:
     - mariadb
 
+- name: "Deployer - Kea - Install"
+  ansible.builtin.apt:
+    name:
+      - kea
+    state: latest
+
+# - name: "Deployer - DHCP - Config"
+#   ansible.builtin.template:
+#     src: './files/dhcp/dhcpd.conf'
+#     dest: '/etc/dhcp/dhcpd.conf'
+#   register: deployerTaskD1
+#   tags:
+#     - dhcp
+
+# - name: "Deployer : DHCP : Restart"
+#   ansible.builtin.systemd_service:
+#     name: isc-dhcp-server
+#     state: restarted
+#     enabled: true
+#   when:
+#     - (deployerTaskD1 is defined and deployerTaskD1.changed) or deployerTaskD1 is undefined
+
 - name: "Deployer - PowerDNS - Configure - Create Folder"
   ansible.builtin.file:
-    path: "~/data/powerdns/"
+    path: "/root/data/powerdns/"
     state: directory
   tags:
     - powerdns
 
 - name: "Deployer - PowerDNS - Configure - Create Subfolders"
   ansible.builtin.file:
-    dest: '~/data/powerdns/{{ item.path }}'
+    dest: '/root/data/powerdns/{{ item.path }}'
     state: directory
   with_filetree: './files/powerdns/'
   loop_control:
@@ -227,7 +227,7 @@
 - name: "Deployer - PowerDNS - Configure - Generating & Transferring Files"
   ansible.builtin.template:
     src: '{{ item.src }}'
-    dest: '~/data/powerdns/{{ item.path }}'
+    dest: '/root/data/powerdns/{{ item.path }}'
   register: deployerTaskP1
   with_filetree: './files/powerdns/'
   loop_control:
@@ -253,7 +253,7 @@
     network: host
     restart_policy: always
     volumes:
-      - "~/data/powerdns/config.conf:/etc/powerdns/pdns.conf:ro"
+      - /root/data/powerdns/config.conf:/etc/powerdns/pdns.conf:ro"
   when:
     - (deployerTaskP1 is defined and deployerTaskP1.changed) or deployerTaskP1 is undefined or (deployerTaskP2 is defined and deployerTaskP2.changed) or deployerTaskP2 is undefined
   tags:
@@ -261,14 +261,14 @@
 
 - name: "Deployer - Nginx - Configure - Create Folder"
   ansible.builtin.file:
-    path: "~/data/nginx/"
+    path: "/root/data/nginx/"
     state: directory
   tags:
     - nginx
 
 - name: "Deployer - Nginx - Configure - Create Subfolders"
   ansible.builtin.file:
-    dest: '~/data/nginx/{{ item.path }}'
+    dest: '/root/data/nginx/{{ item.path }}'
     state: directory
   with_filetree: './files/nginx/'
   loop_control:
@@ -281,7 +281,7 @@
 - name: "Deployer - Nginx - Configure - Generating & Transferring Files"
   ansible.builtin.template:
     src: '{{ item.src }}'
-    dest: '~/data/nginx/{{ item.path }}'
+    dest: '/root/data/nginx/{{ item.path }}'
   register: deployerTaskN1
   with_filetree: './files/nginx/'
   loop_control:

tasks/installer.yml

@@ -12,14 +12,14 @@
     - "task.stdout.find('0 upgraded, 0 newly installed, 0 to remove') == -1"
 
 - name: "Init : Python 3 : Configure - Virtual Environment : Test"
-  ansible.builtin.raw: "~/.venv/ansible/bin/pip3"
+  ansible.builtin.raw: "/root/.venv/ansible/bin/pip3"
   register: task632
   changed_when: false
   failed_when: false
 
 - name: "Init : Python 3 : Configure - Virtual Environment : Delete"
   ansible.builtin.file:
-    path: "~/.venv/ansible"
+    path: "/root/.venv/ansible"
     state: absent
   when:
     - "task632.stdout.find(\"ModuleNotFoundError: No module named 'pip'\") != -1"
@@ -29,7 +29,7 @@
     name: pip
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
 
 - name: "Installer : Tools : Install"
@@ -102,22 +102,22 @@
     name: ansible
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
   tags:
     - ansible
 
 - name: "Installer : Ansible : Create Folder"
   ansible.builtin.file:
-    path: ~/bin
+    path: /root/bin
     state: directory
   tags:
     - ansible
 
 - name: "Installer : Ansible : Create Symbolic Links"
   ansible.builtin.file:
-    src: ~/.venv/ansible/bin/{{ binary }}
-    dest: ~/bin/{{ binary }}
+    src: /root/.venv/ansible/bin/{{ binary }}
+    dest: /root/bin/{{ binary }}
     state: link
   vars:
     binaries:
@@ -144,7 +144,7 @@
     name: "{{ library }}"
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
   vars:
     libraries:
@@ -164,7 +164,7 @@
     name: pymysql
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
   tags:
     - mariadb
@@ -184,7 +184,7 @@
     name: "PVJJK 1.VOS TJAS - Infra - Maintenance"
     hour: "*/3"
     minute: "0"
-    job: "~/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d ~/.ansible/pull/pvjjk-1vos-tjas/infra --accept-host-key --private-key ~/.ssh/keys/pvjjk-1vos-tjas/infra --vault-password-file ~/.ansible/vault/pvjjk-1vos-tjas tasks.yml -t maintenance"
+    job: "/root/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d /root/.ansible/pull/pvjjk-1vos-tjas/infra --accept-host-key --private-key /root/.ssh/keys/pvjjk-1vos-tjas/infra --vault-password-file /root/.ansible/vault/pvjjk-1vos-tjas tasks.yml -t maintenance"
   tags:
     - cron
 
@@ -192,6 +192,6 @@
   ansible.builtin.cron:
     name: "PVJJK 1.VOS TJAS - Infra - Deployer"
     minute: "*/5"
-    job: "~/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d ~/.ansible/pull/pvjjk-1vos-tjas/infra --accept-host-key --private-key ~/.ssh/keys/pvjjk-1vos-tjas/infra --vault-password-file ~/.ansible/vault/pvjjk-1vos-tjas tasks.yml -t deployer"
+    job: "/root/.venv/ansible/bin/ansible-pull -U ssh://git@github.com/cwchristerw/tjas-infra -d /root/.ansible/pull/pvjjk-1vos-tjas/infra --accept-host-key --private-key /root/.ssh/keys/pvjjk-1vos-tjas/infra --vault-password-file /root/.ansible/vault/pvjjk-1vos-tjas tasks.yml -t deployer"
   tags:
     - cron

tasks/maintenance.yml

@@ -4,7 +4,7 @@
     name: "{{ library }}"
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
   vars:
     libraries:
@@ -24,7 +24,7 @@
     name: ansible
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
 
 - name: "Maintenance : MariaDB : Dependencies / Python Library : pymysql"
@@ -32,7 +32,7 @@
     name: pymysql
     state: latest
     extra_args: --upgrade
-    virtualenv: ~/.venv/ansible
+    virtualenv: /root/.venv/ansible
     virtualenv_command: "python3 -m venv"
 
 - name: "Maintenance : Podman : Prune"